« previous next »
Pages: [1]

Author Topic: aluminum 2215's?  (Read 2236 times)

0 Members and 1 Guest are viewing this topic.

Offline JEB

  • Member
  • Posts: 1,735
aluminum 2215's?
« on: July 03, 2013, 02:36:16 pm »
Anyone know of another arrow that has the same inside diameter as a 2215?
Logged

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: aluminum 2215's?
« Reply #1 on: July 03, 2013, 06:33:41 pm »
Measure it, then drill out river cane to fit.
Why?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline JEB

  • Member
  • Posts: 1,735
Re: aluminum 2215's?
« Reply #2 on: July 03, 2013, 07:06:17 pm »
WHY, because they are going to be used for footing arrows and I don't have any 2215's to use but I have over a hundred  of other arrows and was wondering if I had another size with the same inside diameter. AND they are not for me but someone else on another traditional web site.  SO, that means I don't have the arrow that is going to be footed to see if I have one that works.

Which comes down to: I am doing someone a favor.

Thanks for asking and your tip.
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: aluminum 2215's?
« Reply #3 on: July 03, 2013, 08:28:35 pm »
jon
ive got a couple 2215 shafts your welcome too
I can send em to ya or  meet ya some where in Muskegon
ill be going there tomorrow
or ya can pick em up next time your up this way
thanks
Kevin
Logged

Offline sonny

  • Member
  • Posts: 742
Re: aluminum 2215's?
« Reply #4 on: July 03, 2013, 08:29:20 pm »
perhaps you already know this but the 22 indicates the OD is 64ths of an inch and the
15 is the wall thickness (.015)

so (someone double-check this!) the
ID is .31375.
 
you may have to do the math with other sizes to determine their inside diameter.
 
Logged
Never argue with an idiot. They'll drag you down to their level and beat you with experience.

Offline KHalverson

  • Member
  • Posts: 758
Re: aluminum 2215's?
« Reply #5 on: July 03, 2013, 08:43:44 pm »
just checked the i.d with calipers
.3145
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: aluminum 2215's?
« Reply #6 on: July 03, 2013, 08:46:30 pm »
Kevin, thanks but the guy found some on facebook. 
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: aluminum 2215's?
« Reply #7 on: July 03, 2013, 08:52:28 pm »
jon
no problem.
im glad to see Bill Gauld is knapping again.
we need to all get together sometime and do some primitive projects
see ya at Elm Hall if not sooner.
Kevin
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: aluminum 2215's?
« Reply #8 on: July 03, 2013, 09:50:21 pm »
I spoke with Bill today and said he has a booth at the art fair in Hesperia tomorrow.  Wife is working 3rd tonight so I will wonder up your way and visit with Bill and maybe do some knapping  in the morning.
Logged
Pages: [1]
« previous next »