« previous next »
Pages: [1]

Author Topic: Glue-on point taper question  (Read 2625 times)

0 Members and 1 Guest are viewing this topic.

Offline Calamitus

  • Member
  • Posts: 59
Glue-on point taper question
« on: July 01, 2013, 07:51:46 pm »
This might seem obvious to some, but I can't seem to to figure out which taper to use for the glue on field points. I have a Bearpaw taper tool with two different tapers. Which is for points and which is for nocks? For reference please use short and pointier or long and less pointy to describe the difference. :D Thanks!
Logged

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Glue-on point taper question
« Reply #1 on: July 01, 2013, 07:56:05 pm »
Uuuhhh.... I didn't know you tapered for self nocks ;)
Based on my limited experiance with glue-on nocks, the shorter taper(its pointier) is for nocks, the longer, less pointy one is for the point. Most points use a 5 degree taper, and I think nocks use a 10 degree taper.
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline Calamitus

  • Member
  • Posts: 59
Re: Glue-on point taper question
« Reply #2 on: July 01, 2013, 08:15:51 pm »
I am interested in points, not nocks. I want to make some nice target arrows for my nephew and the bow I'm making him for his 13th birthday. I will do self nocks.
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Glue-on point taper question
« Reply #3 on: July 01, 2013, 08:28:07 pm »
Use the long taper for points.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Glue-on point taper question
« Reply #4 on: July 01, 2013, 10:56:44 pm »
Quote from: Calamitus on July 01, 2013, 08:15:51 pm
I am interested in points, not nocks. I want to make some nice target arrows for my nephew and the bow I'm making him for his 13th birthday. I will do self nocks.
I did answer your question, didn't I?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline Calamitus

  • Member
  • Posts: 59
Re: Glue-on point taper question
« Reply #5 on: July 01, 2013, 11:10:39 pm »
Quote from: Thesquirrelslinger on July 01, 2013, 10:56:44 pm
Quote from: Calamitus on July 01, 2013, 08:15:51 pm
I am interested in points, not nocks. I want to make some nice target arrows for my nephew and the bow I'm making him for his 13th birthday. I will do self nocks.
I did answer your question, didn't I?

Yes, you did. Thank you.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Glue-on point taper question
« Reply #6 on: July 01, 2013, 11:47:26 pm »
The long taper(for points is 5deg and the short taper(for nocks) is 11deg.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: Glue-on point taper question
« Reply #7 on: July 02, 2013, 08:10:14 am »
What PatB said. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Scottski

  • Member
  • Posts: 462
Re: Glue-on point taper question
« Reply #8 on: July 05, 2013, 12:12:22 pm »
Is it not the other way around long taper 11 deg for points and 5 deg for nocks? Or have I now confused myself?
Logged
Did the Native Americans think about all this that much or just do it?

Offline okie64

  • Member
  • Posts: 1,134
Re: Glue-on point taper question
« Reply #9 on: July 05, 2013, 02:47:31 pm »
11 degrees is a steeper angle than 5 degrees, therefore making 11 the shorter taper. It is a little confusing but Pats got it right.
Logged

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Glue-on point taper question
« Reply #10 on: July 08, 2013, 12:24:33 pm »
The field point will only fit properly on one of the tapers.  If in doubt, taper a piece of scrap to remind yourself which end is which. 
Logged

Offline PaulN/KS

  • Member
  • Posts: 1,389
Re: Glue-on point taper question
« Reply #11 on: July 13, 2013, 04:29:49 am »
I marked the blade ends of my bearpaw with a sharpie for nock or point tapers...
Logged
Pages: [1]
« previous next »