« previous next »
Pages: 1 [2]

Author Topic: My first bow  (Read 2887 times)

0 Members and 1 Guest are viewing this topic.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: My first bow
« Reply #15 on: July 01, 2013, 09:07:07 am »
I should have known your first one would have been made from osage!! ::)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: My first bow
« Reply #16 on: July 01, 2013, 09:13:26 am »
Quote from: bubby on July 01, 2013, 03:34:44 am
just curious, how much set did it end up with

Actually very little.  I didn't shoot it much.  As soon as I got this one done I started on another and it turned out better.  I'll get a picture of the side profile today. 
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: My first bow
« Reply #17 on: July 01, 2013, 09:47:40 pm »
Here you go Bubby.  It started off with some reflex.  At the time I didn't know if that was good or bad  ;D  I remember using an angle grinder with a sanding disc for getting it to rough shape and floor tiller. 

Logged
I started out with nothin' and I still got most of it left

Offline seabass

  • Member
  • Posts: 2,267
Re: My first bow
« Reply #18 on: July 01, 2013, 10:59:31 pm »
not bad Clint.my firsts are on here somewhere if you want to go through the archives.probably not worth the trouble looking them up though.
Logged
Middletown,Ohio

Offline bubby

  • Member
  • Posts: 11,054
Re: My first bow
« Reply #19 on: July 02, 2013, 06:05:52 am »
heck that's not to bad hardly any at all,
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 [2]
« previous next »