Author Topic: No. 6 of 6  (Read 4318 times)

0 Members and 1 Guest are viewing this topic.

Online Hamish

  • Member
  • Posts: 1,505
Re: No. 6 of 6
« Reply #15 on: June 21, 2013, 07:21:42 pm »
Man even if those inner limbs don't seem to be bending much, the set is beautifully low, and very even. Nothing even hinting a hinge. Nice work.
                                                                    Hamish.

Offline twisted hickory

  • Member
  • Posts: 375
Re: No. 6 of 6
« Reply #16 on: June 21, 2013, 08:19:00 pm »
Thanks guys.
I left the fades a little stiff for a couple reasons. The bottom fade has a wicked crack or shake running across and through it and I didn't want it  doing much work. The limbs kept a lot of width down the length so that's where I made them work. The unstrung profile looks like it's not taking much set so I will be OK with the tiller.
This was a really cool stave. Fairly straight grain but lots of pins and knots to dodge. It is checked almost the full length down the back of the bow.

Squirrely Boy why don't you post one of your bows so I can see what good tiller is eh?

I see. I really like it. I have a piece of bl that is half finished with the same problems...Except the inner limbs are working a bit more....It might go bang on me ;) Then I get to build another :) My next few will have flipped tips I really like how they look.

Offline Don

  • Member
  • Posts: 331
Re: No. 6 of 6
« Reply #17 on: June 21, 2013, 08:29:14 pm »
Looks good JonW. Love the knots.
You have been busy.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: No. 6 of 6
« Reply #18 on: June 22, 2013, 03:34:44 pm »
Cannot say which one looks better.
You should make another one   --  Nr. 7!

Really wonderful bows!
Simon
Bavaria, Germany

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: No. 6 of 6
« Reply #19 on: June 22, 2013, 04:23:50 pm »
Good bow Jon, you work a piece of locust well. Now I'm itching to start on some locust again cept' the locust
I have in the shop is to fresh and needs to season a while.
I ain't broke but I'm badly bent.

Offline DLH

  • Member
  • Posts: 400
Re: No. 6 of 6
« Reply #20 on: June 23, 2013, 09:10:48 pm »
Looks nice I like it a lot.Reminds me of the one I have going except now that I have seen yours I believe I have screwed my pin knots up. :'(

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: No. 6 of 6
« Reply #21 on: June 24, 2013, 12:07:55 am »

Squirrely Boy why don't you post one of your bows so I can see what good tiller is eh?
Which one ;)


The little elm was an experiment(and reminded me why you are supposed to remove the bark from a bow)- the bark backing fractured and created a hinge.
The bigger elm isn't finished.
The longbow, you already know.
The fiberglass recurve... well, why not ;)
-Squirrel
« Last Edit: June 24, 2013, 12:13:31 am by Thesquirrelslinger »
"Insanity is doing the same thing over and over again and expecting different results"

Offline steve b.

  • Member
  • Posts: 999
Re: No. 6 of 6
« Reply #22 on: June 24, 2013, 01:31:05 am »
One that shows you know what good tiller is

Offline keef

  • Member
  • Posts: 79
Re: No. 6 of 6
« Reply #23 on: June 24, 2013, 12:59:26 pm »
 Enjoyed seeing that bow John, really nice work.

Offline bushboy

  • Member
  • Posts: 2,256
Re: No. 6 of 6
« Reply #24 on: June 24, 2013, 04:56:49 pm »
Nice job on that one jon!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline JonW

  • Member
  • Posts: 1,906
Re: No. 6 of 6
« Reply #25 on: June 24, 2013, 06:18:15 pm »
Thanks again everyone. Locust is some good bow wood.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: No. 6 of 6
« Reply #26 on: June 26, 2013, 04:18:27 am »
Beautiful workmanship on a tricky stave.  I agree with you about black locust - it makes a great bow.  Enjoyed this post.  :)
Howard
Gautier, Mississippi

Offline CORIUS

  • Member
  • Posts: 158
Re: No. 6 of 6
« Reply #27 on: June 26, 2013, 08:21:17 am »
One that shows you know what good tiller is

I second that big time.
Where there's a will, there's a bow.


PA subscription #: PM108452