Heres some pics of one I recently finished from a split of mulberry given to me by Mr. Paul Semp of this forum and backed with some birch bark I got off a downed tree in Mich. last summer. Came in at around 45# @ 26" but then had a problem. While holding at full
draw while my wife snapped a photo I heard a cracking noise. Small hairline crack developed about 6" above the handle on the back.
I've since done a rawhide and sinew wrap there and retillered down to around 40# or less now. I don't think I'll hold a bow at full
draw for more than a second or two again after that.

The bows around 60" , 1 5/8" at fades and sort of pyramid taper to 9/16" wide at tips, sinew wraps at couple areas. This one is not a great shooter by any means but will make an OK target bow for an occasional archer, one of my daughters likely.
Thanks for looking

Greg