Author Topic: Got started on the ironwood / ? for the hickory/osage guys also  (Read 2777 times)

0 Members and 1 Guest are viewing this topic.

Offline half eye

  • Member
  • Posts: 3,300
was sayin as how I was given access to a large amount of dead standing ironwood. Made a couple bows from the stuff last fall so I know it's sound. Well here's some pics to show how straight it is also how heavy the butt end is.

Cut all of the wood today at 68". All the wood left of the large piece is one 4" diameter ironwood. the large piece is the butt end of a set of twins that are twice as tall as the little ones came from. I weighed the butt end and it was 83 pounds (avg diam 6-1/2' & length 68") and I'm curious as how that compares to similiar sized hickory or osage. This seems to be especially dense I think and was curious. There's so much out there gonna be makin trips for a couple weeks at least. Old men aint the fastest bunny in the hutch however so it might be longer.

I was impressed at how straight and limb/knot free these trees are.
rich

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #1 on: May 07, 2013, 07:51:16 pm »
That looks like some fine bow wood!  It's definitely some very dense wood.  I cut a piece about that size the other day and it was heavy as hell too.  You are lucky to have so much of it.  In my neck of the woods I have to spend a lot of time looking for a decent stave of hophornbeam - it's a little rare in these parts.   
Howard
Gautier, Mississippi

Offline bubby

  • Member
  • Posts: 11,054
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #2 on: May 07, 2013, 07:56:17 pm »
that is some fine looking wood Rich, I got to think it is denser than hickory I have a pc of ocean spray, ironwood one inch across and it is heavy as all get out
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline half eye

  • Member
  • Posts: 3,300
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #3 on: May 07, 2013, 08:15:29 pm »
Ya I know it is a windfall for sure. These ironwoods had to grow up in a hard maple forest so they had to get tall and straight, and that dont happen very often. I believe there might be as many as 75 trees total that are dead standing, and maybe that many (maybe a few more) thats dying because of "skidder" damage when the maple was logged off ,  about 3 years ago here shortly
rich

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #4 on: May 07, 2013, 09:04:49 pm »
That's some good lookin wood, Rich! I see a lot of bows there. I can't wait to see some of them!! :P
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #5 on: May 07, 2013, 09:37:23 pm »
Is that the same as the stuff they call muscle wood?  I've seen some really nice bows made from that stuff.  The outer rings are so ripply they look like muscle tissue.  Can't wait to see what you get out of these Rich.

Offline ksnow

  • Member
  • Posts: 545
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #6 on: May 07, 2013, 09:40:30 pm »
That looks like hop hornbeam, musclewood is just hornbeam (or blue beech).  I have also heard both called ironwood.  That is quite a haul, and sounds like you will be in ironwood for a while.  Definitely going to cut myself some after seeing what can be doen with this wood.

Kyle

Offline half eye

  • Member
  • Posts: 3,300
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #7 on: May 07, 2013, 10:04:20 pm »
This is what yall call hop hornbeam not the muscelwood (american hornbeam). All the sawyers up here call it ironwood.
rich

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #8 on: May 07, 2013, 10:22:56 pm »
Nice haul Rich! Can't wait to see some bows outta that stuff.
Greg Sulfridge, Lafollette, TN

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Got started on the ironwood / ? for the hickory/osage guys also
« Reply #9 on: May 07, 2013, 11:14:16 pm »
Good stuff ,Rich!! How does it feel to finally post a picture with no snow in the background? ;D