« previous next »
Pages: [1] 2

Author Topic: Which do you reduce first?  (Read 3440 times)

0 Members and 1 Guest are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
Which do you reduce first?
« on: April 29, 2013, 07:57:32 pm »
Hey guys,

Do you reduce the belly taper (thickness) or the side taper (width) first? Why do you prefer one way over the other? I like to reduce the belly first, then cut the front profile, since I think it gives me a more even thickness taper. Just curious what others do and why.

Jon
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Which do you reduce first?
« Reply #1 on: April 29, 2013, 08:05:46 pm »
Side taper profile first, then belly thickness taper for me. I have profile templates for all of my bow designs. Just the way I do it... I don't think it matters that much, as long as your tapers are reasonably even.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Which do you reduce first?
« Reply #2 on: April 29, 2013, 08:06:09 pm »
I do the sides first, less to remove on the belly that way
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: Which do you reduce first?
« Reply #3 on: April 29, 2013, 08:07:30 pm »
Quote from: bubby on April 29, 2013, 08:06:09 pm
I do the sides first, less to remove on the belly that way

x2
Logged
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Which do you reduce first?
« Reply #4 on: April 29, 2013, 08:15:29 pm »
I like to do the sides first because then it seems easier to remove wood off the belly and it also I just like to see what the bows gonna look like when I'm finished
Logged
I like osage

Offline Red Tailed Hawk

  • Member
  • Posts: 75
Re: Which do you reduce first?
« Reply #5 on: April 29, 2013, 08:36:55 pm »
Always have done sides first. As already said I dont think it matters either way.
Logged

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Which do you reduce first?
« Reply #6 on: April 29, 2013, 08:44:17 pm »
Sides, I work with hand tools and every shaving counts.
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline bushboy

  • Member
  • Posts: 2,256
Re: Which do you reduce first?
« Reply #7 on: April 29, 2013, 08:58:09 pm »
On board bow I reduce the belly first then cut the profile.this way I can mark it all out @ once.doesn't matter bout the extra wood cuz I use power tools,with a young family I have to go like the wind!lol!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Which do you reduce first?
« Reply #8 on: April 29, 2013, 09:25:10 pm »
Sides first always. If you leave the sides "rough" and work the belly down to a proper tiller you will lose a bunch of weight and possibly screw the tiller up as well. Not to mention its easier to layout your thickness profile on a clean edge and not a split edge.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline twisted hickory

  • Member
  • Posts: 375
Re: Which do you reduce first?
« Reply #9 on: April 29, 2013, 10:52:59 pm »
I cut out the profile (width) first. It is easier to get thickness of limbs more accurate.
Greg
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Which do you reduce first?
« Reply #10 on: April 30, 2013, 12:08:15 am »
I cut out the bows back profile first them remove wood from the belly side of the limbs until both limbs bend evenly and together at the draw length and weight I desire.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Which do you reduce first?
« Reply #11 on: April 30, 2013, 12:42:24 am »
Pretty much always the sides first. If the belly is real deep I kinda reduce it somewhat with a hatchet to maybe 1" thick rough out
but always clean up side profile to lay out thickness taper before thinning belly close to taper lines.
Logged
I ain't broke but I'm badly bent.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Which do you reduce first?
« Reply #12 on: April 30, 2013, 04:25:51 am »
Sides first, much less ring chasing and back cleaning on the back of an ELB.
BUT on an ELB leave the tips fairly wide to avoid twist/alignment issues.
In the early stages and elb is so near same width as depth it can try to twist/bend sideways.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Which do you reduce first?
« Reply #13 on: April 30, 2013, 12:15:46 pm »
I tend to come at it in stages.  I do the sides to reasonably close, then reduce thickness to get it floor-tillered, then revisit the sides with greater attention to detail, dialing them in with a cabinet scraper.  Then tiller from the belly.  Reduce weight from the sides. 
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline Squirrelslayer

  • Member
  • Posts: 529
Re: Which do you reduce first?
« Reply #14 on: April 30, 2013, 12:41:43 pm »
sides first and then belly. less wood removal for the belly. SSS
Logged
WARNING: posts may contain nuts.

http://squirrelslayers.forumshome.com/ - check out my forum, and if you like what you see... Join!

also on YouTube

https://www.youtube.com/user/cj822100?feature=mhee
Pages: [1] 2
« previous next »