« previous next »
Pages: [1]

Author Topic: Feather burner  (Read 5187 times)

0 Members and 1 Guest are viewing this topic.

Offline Ink

  • Member
  • Posts: 301
  • Jason Chollett
Feather burner
« on: April 23, 2013, 02:43:24 pm »
Hi, new to the site. Love the forums and the magazine.
Was wondering if anyone had a link for a feather burner build along?
Or at least can tell me what's needed to make one without electrocuting
Myself in the process.
Logged
Chew Motrin, drink water, drive on

Offline anasazi

  • Member
  • Posts: 144
Re: Feather burner
« Reply #1 on: April 23, 2013, 03:13:46 pm »
I am going to give an old hair dryer a try but ive heard a hot stick from a fire works well to
Logged

Offline Stoker

  • Member
  • Posts: 1,727
Re: Feather burner
« Reply #2 on: April 23, 2013, 03:58:49 pm »
freind made one from toaster elements and his battery charger at 6V. Got it off the net somewhere
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Feather burner
« Reply #3 on: April 23, 2013, 04:18:41 pm »
Here is one I made out of scrap wood and bolts from my garage.  I bought the element from 3rivers.com for $2.  I hook a battery charger up to each post and set it on 6 volts.  I just used it yesterday.

Logged
I started out with nothin' and I still got most of it left

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Feather burner
« Reply #4 on: April 23, 2013, 04:44:34 pm »
Nice lookin burner OO.  You shoulda been an engineer.  Anybody got any of those ribbons they can bring to the Classic?  I've got an idea using a computer powersource that I use to etch knives with.  It's got 6V and 12V capacity. dpg
Logged
(:::.)    Osage music played daily. :)

Offline Ink

  • Member
  • Posts: 301
  • Jason Chollett
Re: Feather burner
« Reply #5 on: April 23, 2013, 04:58:20 pm »
That looks like what I had in mind. Thanks outlaw.
Logged
Chew Motrin, drink water, drive on

Offline bubby

  • Member
  • Posts: 11,054
Re: Feather burner
« Reply #6 on: April 23, 2013, 06:55:35 pm »
I've made the same basic rig OO, works great
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Feather burner
« Reply #7 on: April 23, 2013, 07:47:02 pm »
That wasn't my invention.  I saw some plans online where they used an old model train transformer.  I just rednecked it up a little with a battery charger.

Derik, I have heard that piano wire will work instead of the ribbon but I haven't tried it.  Maybe Big Jim will have some in his booth at the Classic.  We will check it out.  I could use another one or two.
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Feather burner
« Reply #8 on: April 23, 2013, 09:10:31 pm »
You can also use an electric soldering iron for the power source.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Feather burner
« Reply #9 on: April 24, 2013, 03:45:56 pm »
the piano wire works good, we had a bunch that we used to get straight lines building gunite pools, just make shure its on 6 volt, wire gets white hot and then blows on 12 v, don't ask how I know ::)
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

mikekeswick

  • Guest
Re: Feather burner
« Reply #10 on: April 26, 2013, 09:23:34 am »
I made one with a lighting dimmer switch wired in. Then you have really fine control over the voltage.
Logged

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Feather burner
« Reply #11 on: April 26, 2013, 09:39:21 am »
Interesting thread...
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Feather burner
« Reply #12 on: April 29, 2013, 01:02:09 pm »
I don't burn feathers, but if I did, I have access to plenty of nichrome wire. (the stuff used in sealer/shrinkwrap machines) http://www.mcmaster.com/#nickel-chromium-%28nichrome%29-wire/=mj6ywx <<<<This stuff. We use .036 wire in our sealers. One thing you MUST do is stretch it first. Make yourself a steel rod (1/2" dia) about 8" long with a small hole, big enough for the wire, drilled through the center. Cut a length of wire, clamp one end in a vice, poke the other end through the hole in your "handle" and wrap it around a few times. Now use a wide stance (in case you pull so hard it breaks) and stretch the wire until it feels like it doesn't want to stretch any more. If you don't pre-stretch the wire, it will deform when really hot. Now clip and form!
Logged
Pages: [1]
« previous next »