« previous next »
Pages: [1]

Author Topic: Cheap and easy dowel maker.  (Read 3887 times)

0 Members and 2 Guests are viewing this topic.

Offline twisted hickory

  • Member
  • Posts: 375
Cheap and easy dowel maker.
« on: April 24, 2013, 09:51:35 pm »
I thought since there are a couple of threads on making dowels here is a cheap alternative. I have yet to make these since I have about 100 red osier shafts but here is the link.
http://www.youtube.com/watch?v=dR9-gdNdZAA&feature=related
Hope someone gets some use out of it. It looks like it would work pretty good.
Greg
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Cheap and easy dowel maker.
« Reply #1 on: April 24, 2013, 09:59:12 pm »
Looks pretty simple ............will have to give it a try.
Thanks for the link
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline bigpapa

  • Member
  • Posts: 93
  • all the senorita's call me bigpapa
Re: Cheap and easy dowel maker.
« Reply #2 on: April 25, 2013, 10:59:07 am »
I made one from a bit bigger steel stock, it works great. Bad part of the video is he didn't give any dimensions. I got my plans from a different link, and it took me about four or five trys to get it right. They are dandy though.
Logged
Our only limitations in life are the ones we put on ourselves!
Dream your dreams, and fly like the eagles!

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Cheap and easy dowel maker.
« Reply #3 on: April 25, 2013, 05:37:24 pm »
http://www.ibuildit.ca/Workshop%20Projects/Jigs/dowel-maker-1.html
It has the dimensions, he has a link in the 2nd video.

I am gonna go make one.
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline twisted hickory

  • Member
  • Posts: 375
Re: Cheap and easy dowel maker.
« Reply #4 on: April 26, 2013, 02:20:28 pm »
Good to see someone chime in with some experience with this type of dowel maker. That will be next winters project. Right now I have turkey on the brain ;)
Greg
Logged

Offline bigpapa

  • Member
  • Posts: 93
  • all the senorita's call me bigpapa
Re: Cheap and easy dowel maker.
« Reply #5 on: April 30, 2013, 10:04:50 am »
I had used 1/4 thick flat bar for mine. It doesn't make a real smooth one like in the video. I would say a thinner material would cut better. Time for a revisment. Lol!!
Logged
Our only limitations in life are the ones we put on ourselves!
Dream your dreams, and fly like the eagles!

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Cheap and easy dowel maker.
« Reply #6 on: April 30, 2013, 01:45:35 pm »
I make a tapered and footed shaft. I just use block planes to achieve round .. works fine.  Pluss I can use the block plane on other stuff like the edges of bows "V" splices etc.  you just need a track to set the arrow in.
Logged

Offline Stonedog

  • Member
  • Posts: 257
Re: Cheap and easy dowel maker.
« Reply #7 on: April 30, 2013, 09:38:19 pm »
Thank you for sharing!

Perfect thing to take a 3/8" oak dowel down to 11/32"!
Logged
Till shade is gone, till water is gone, into the Shadow with teeth bared, screaming defiance with the last breath, to spit in Sightblinder's eye on the Last Day.

-Aiel Saying
Pages: [1]
« previous next »