« previous next »
Pages: [1]

Author Topic: edge grain  (Read 1351 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt A

  • Member
  • Posts: 123
edge grain
« on: April 11, 2013, 11:56:17 pm »
i have a huge osage board from kansas drying, if i can find a part long enough with no knots present and back it with hickory or something what would be the design best for it. #2 would squiggly grain matter at all? it looks like a small roller coaster ride for the whole board.
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: edge grain
« Reply #1 on: April 11, 2013, 11:57:57 pm »
If its snakey, see if you can chase a ring!
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Matt A

  • Member
  • Posts: 123
Re: edge grain
« Reply #2 on: April 12, 2013, 12:02:58 am »
the edge grain is but nothing over about 3/8"
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: edge grain
« Reply #3 on: April 12, 2013, 03:20:44 am »
Well, advice would be moe valuable if we could base it off some pics....
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

mikekeswick

  • Guest
Re: edge grain
« Reply #4 on: April 12, 2013, 03:59:33 am »
The OP asked about a good design for a hickory backed osage.... :D
Matt - osage will do any style of bow you want (just about!) just go with whatever you want.  ;)
« Last Edit: April 12, 2013, 04:12:14 am by mikekeswick »
Logged

mikekeswick

  • Guest
Re: edge grain
« Reply #5 on: April 12, 2013, 04:15:47 am »
Just as a side note I went into my specialist hardwood supplier and he had a section cut from a large osage tree, maybe 8 foot long by 2 1/2 foot wide and 3 -4 inch thick......price £1200   or $1800     :o
You guys in America have got it lucky! Osage is really expensive once it's had a boat trip across the Atlantic
Logged

Offline Holten101

  • Member
  • Posts: 295
Re: edge grain
« Reply #6 on: April 12, 2013, 04:36:54 am »
Quote from: mikekeswick on April 12, 2013, 04:15:47 am
Just as a side note I went into my specialist hardwood supplier and he had a section cut from a large osage tree, maybe 8 foot long by 2 1/2 foot wide and 3 -4 inch thick......price £1200   or $1800     :o
You guys in America have got it lucky! Osage is really expensive once it's had a boat trip across the Atlantic
I second that.....I have all but given up on getting my hands on Osage:-(.

Sorry for going out of topic...but I felt like venting some fustration;-)

I feel better now;-)

Cheers
Logged

Offline gpw

  • Member
  • Posts: 149
Re: edge grain
« Reply #7 on: April 12, 2013, 08:10:05 am »
 Although that price may sound excessive , if it was a “Perfect” board , with the correct tools , you could make many bows from that one piece ...  Given the price of a good Osage bow , you’ll likely come out ahead on the deal ...   The short leftover pieces could be fashioned into short Indian style bows ... or even mini-bows ..   Only if it’s Perfect !!!  Crumbs for thought ...
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: edge grain
« Reply #8 on: April 12, 2013, 08:40:23 am »
Straight edge grain is the best, with your board you will have a lot of runs outs with edge grain, not good. Can you cut it into flat sawn billets, 1 1/2 wide is plenty?
Logged

Offline Matt A

  • Member
  • Posts: 123
Re: edge grain
« Reply #9 on: April 12, 2013, 01:22:13 pm »
no need for billets here the board is about 12 feet long x about 2 inches thick x 5 inches wide lol

same goes for people in my area of the united states and trying to get some yew! so i feel ya! osage grows about 800 miles away from me so a guy that goes to kansas all the time has been bringing me back some little by little.
Logged
Pages: [1]
« previous next »