« previous next »
Pages: [1] 2

Author Topic: How to make a stave out a board.  (Read 3266 times)

0 Members and 2 Guests are viewing this topic.

Offline Nicole

  • Member
  • Posts: 29
How to make a stave out a board.
« on: March 29, 2013, 02:23:35 am »
I have a nice piece of Hickory about 2 in BY 2in. I was wondering how to turn it into a stave so i can build a bow with a completely round cross section.
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: How to make a stave out a board.
« Reply #1 on: March 29, 2013, 02:39:42 am »
If it's 2 x 2 square, it isn't going to happen. Bows aren't completely round. Only way to get a bow that is rounded over somewhat on the back is with a smaller diameter stave that is cut from a very narrow tree.
Logged

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #2 on: March 29, 2013, 02:40:07 am »
why?
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: How to make a stave out a board.
« Reply #3 on: March 29, 2013, 02:45:43 am »
Because you need the back of the bow to be of one Continuous growth ring. Otherwise it will blow apart when you bend it.
Logged

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #4 on: March 29, 2013, 03:08:05 am »
oh ok. thanks for the info
Logged

Offline TacticalFate

  • Member
  • Posts: 234
Re: How to make a stave out a board.
« Reply #5 on: March 29, 2013, 03:14:10 am »
Some woods you can chase a ring on a board to turn it into a stave (hickory ain't one of them), but unless your board comes from the very center of the tree, you're not gonna get a rounded back. Go chop down a small suitable sapling, I'd say an inch to an inch and a half, let it dry, and make a bow out of that.
Logged

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #6 on: March 29, 2013, 03:31:40 am »
i dont have access to that good saplings. all i have is lumber wood. are u sure i cant chase a growth ring on a hickory. looking at the way it was cut i think i would have enough wood.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: How to make a stave out a board.
« Reply #7 on: March 29, 2013, 03:40:01 am »
Post some pictures of your board please.  Get a good shot of the end and the grain running down the length of the board
Logged
I started out with nothin' and I still got most of it left

Offline sleek

  • Member
  • Posts: 6,707
Re: How to make a stave out a board.
« Reply #8 on: March 29, 2013, 03:42:23 am »
So long as the rings are in the center of the board, you can do it. Pics, would help allot.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #9 on: March 29, 2013, 04:08:47 am »
ok. i'll get some up as soon as i can.
Logged

mikekeswick

  • Guest
Re: How to make a stave out a board.
« Reply #10 on: March 29, 2013, 04:28:53 am »
Of course you can chase a ring on any board as long as it's big enough. ::) Why on earth would you not be able to?
Bows DO NOT need to be one single growth ring on the back - what matters is that the fibers aren't violated for the length of the back - these are different things.
Logged

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #11 on: March 29, 2013, 04:42:06 am »
I dont know what it means to violate the fibers. Can u explain?
Logged

Offline chamookman

  • Member
  • Posts: 2,994
Re: How to make a stave out a board.
« Reply #12 on: March 29, 2013, 06:06:43 am »
Welcome to the site Nicole. I'd suggest getting a copy of the Traditional Bowyers Bible vol 1 - it'll have answers to Your questions and help You on Your way. Between the book and all the GREAT People on this site, You be makin' shavings in no time. Have FUN - Bob.
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline bubby

  • Member
  • Posts: 11,054
Re: How to make a stave out a board.
« Reply #13 on: March 29, 2013, 06:11:24 am »
1. you don't have to have a single ring on the back of a board bow
2. you can chase a ring and get a single ring back if you are so inclined
3. post some pics and ask lots of ??
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Nicole

  • Member
  • Posts: 29
Re: How to make a stave out a board.
« Reply #14 on: March 29, 2013, 06:28:54 am »
I have the first 2 volumes already. and it definately has answered some of  my questions. thanks
Logged
Pages: [1] 2
« previous next »