« previous next »
Pages: [1]

Author Topic: DIY TD bow sleeves  (Read 2546 times)

0 Members and 2 Guests are viewing this topic.

Offline Christian Soldier

  • Member
  • Posts: 245
DIY TD bow sleeves
« on: March 28, 2013, 06:09:01 pm »
I really want a TD self bow.  :)

However, the only TD sleves around that I could find were $40 from 3R and even then I read that they were sub par.

So, Anyone try making their own? I know there's a pretty wide selection of copper and threaded steel pipe at my hardware store, I might try something from there but I wanted to get some tips from yall first.

Thanks!


Dan
Logged
2nd Timothy 2:3 "Endure hardship with us like a good soldier of Christ Jesus."

Offline bubby

  • Member
  • Posts: 11,054
Re: DIY TD bow sleeves
« Reply #1 on: March 28, 2013, 07:15:40 pm »
check out the latest copy of primitive archer, there's more than one way to skin a cat, two in this mag alone ;)
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: DIY TD bow sleeves
« Reply #2 on: March 28, 2013, 08:21:00 pm »
Very soon I will be showing a takedown I personally have never seen, and came up with with some thought.....I REALLY CAN'Y WAIT TO SHOW, AND TELL... ;)

VMB
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline bubby

  • Member
  • Posts: 11,054
Re: DIY TD bow sleeves
« Reply #3 on: March 28, 2013, 08:44:11 pm »
now that got my interest
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: DIY TD bow sleeves
« Reply #4 on: March 28, 2013, 08:58:45 pm »
Here's my one and only. Thread here:
http://www.primitivearcher.com/smf/index.php/topic,35934.msg472394.html#msg472394

I've been shooting it since Nov.  '12 and like it quite well. Taking it down is quick and it's very handy.

Jim Davis
Logged
Jim Davis

Kentucky--formerly Maine

Offline Christian Soldier

  • Member
  • Posts: 245
Re: DIY TD bow sleeves
« Reply #5 on: March 29, 2013, 10:33:31 am »
I'll have to pick up this copy of PA.

VMB, really looking forward to it, TD bows have always been facinating to me.

asharrow, I might try something similar but with pre made parts, I'll see if I can get out to Ace today and do some brain storming.  :)
Logged
2nd Timothy 2:3 "Endure hardship with us like a good soldier of Christ Jesus."
Pages: [1]
« previous next »