Author Topic: Looking for ideas to seal a knife handle.  (Read 9601 times)

0 Members and 1 Guest are viewing this topic.

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Looking for ideas to seal a knife handle.
« on: March 22, 2013, 06:56:49 pm »
I usually use wood or bone for knife handles, seal em with beeswax and elbow grease.  I've got an antler with an osage pommel just as smooth as I can get it w/o powertools.  I've always used bee wax or propolis on the wood, don't really seal the bone.  What do you use?  Do I seal the antler too?  It's all PC7nd together and pinned.  Just looking for some options.  Thanks for lookin and a reply! dpg
(:::.)    Osage music played daily. :)

Offline bubby

  • Member
  • Posts: 11,054
Re: Looking for ideas to seal a knife handle.
« Reply #1 on: March 22, 2013, 07:06:51 pm »
dp take the bees wax and mix with some mineral oil, it will soak in real good, I use it on cups and bowls cause it's food safe, antler I just get a gloss on the buffer
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Looking for ideas to seal a knife handle.
« Reply #2 on: March 22, 2013, 09:05:09 pm »
I used Tru-Oil on the cholla handle knives I posted recently. Look it up to see how they look.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Looking for ideas to seal a knife handle.
« Reply #3 on: March 23, 2013, 12:57:56 pm »
Thanks for the reply guys!  Bubby, I've used mineral oil too, I may give that a try.  Pat, I'll check em out, I remember when you started that post.  Thanks again, dp
(:::.)    Osage music played daily. :)

Offline CaptainBeaky

  • Member
  • Posts: 51
  • Maker of stuff
    • Westmead Artificing
Re: Looking for ideas to seal a knife handle.
« Reply #4 on: March 25, 2013, 08:25:28 am »
Errr... Mineral oil ain't food-safe, gents  :o

Beeswax dissolved in turpentine, possibly, or preferably Danish Oil, I would suggest.

Danish Oil will soak into the tiny fissures in the antler then set hard. Once you've polished the surface after 2 or 3 coats of oil,  a coat of Renwax should seal the whole lot in nicely.
The law hangs the man and flogs the woman
That steals the goose from off the common
But lets the greater villain loose
That steals the common from under the goose.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Looking for ideas to seal a knife handle.
« Reply #5 on: March 25, 2013, 08:36:54 am »
I use tru oil also,buff with 000 steel wool in between coats,I use it on wood/horn/antler and bone.  :) with good rusults. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Looking for ideas to seal a knife handle.
« Reply #6 on: March 25, 2013, 11:18:24 am »
Errr... Mineral oil ain't food-safe, gents.

I thought they sold mineral oil as a laxative?
(:::.)    Osage music played daily. :)

Offline bubby

  • Member
  • Posts: 11,054
Re: Looking for ideas to seal a knife handle.
« Reply #7 on: March 25, 2013, 03:58:31 pm »
yep, says right on the bottle lubricant laxitave , think I got the how to on wooden bowls to use the bees wax mineral oil mix right out of an old mother earthnews
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Looking for ideas to seal a knife handle.
« Reply #8 on: March 25, 2013, 05:01:32 pm »
Bubby,

Do you heat the wax to liquid then mix with the mineral oil?  What does it turn into a "snow seal" type of mix?  1/2 and 1/2 or what?  experiment?  ??? ;D Thanks bubby, dp
(:::.)    Osage music played daily. :)

Offline bubby

  • Member
  • Posts: 11,054
Re: Looking for ideas to seal a knife handle.
« Reply #9 on: March 25, 2013, 06:50:48 pm »
warm the wax up some and then just add a bit at a time till it gets the texture of a loose paste wax, basically experiment with it till it works best for you, my son mixes mine up, if I can get ahold of him i'll see what his mix is
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline CaptainBeaky

  • Member
  • Posts: 51
  • Maker of stuff
    • Westmead Artificing
Re: Looking for ideas to seal a knife handle.
« Reply #10 on: March 31, 2013, 08:11:40 pm »
Errr... Mineral oil ain't food-safe, gents.

I thought they sold mineral oil as a laxative?

You may be thinking of "liquid paraffin". Strictly a mineral oil as it is an alkane.
The law hangs the man and flogs the woman
That steals the goose from off the common
But lets the greater villain loose
That steals the common from under the goose.