« previous next »
Pages: [1]

Author Topic: Pin knots  (Read 1284 times)

0 Members and 1 Guest are viewing this topic.

Offline NTProf

  • Member
  • Posts: 250
Pin knots
« on: March 19, 2013, 09:21:42 pm »
Are a few pin knots a problem on a tree stave (I know they are on a board)?
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Pin knots
« Reply #1 on: March 19, 2013, 09:35:12 pm »
not that big of a deal if they are placed in the middle of the stave, although i see a lot of bows with pin knots riddling the bow so i think it doesnt seem to matter provided you treat it right.
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Pin knots
« Reply #2 on: March 19, 2013, 09:41:17 pm »
If you work around them carefully and don't cut through them they are not that big of a deal
Logged
I started out with nothin' and I still got most of it left

Online Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Pin knots
« Reply #3 on: March 19, 2013, 11:40:45 pm »
What Clint said. As long as you don't violate them they should be no problem.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Pin knots
« Reply #4 on: March 19, 2013, 11:43:47 pm »
Half of a pair of scissors is a great tool for working around pin knots.  You can do some precision scraping with the tip.
Logged
I started out with nothin' and I still got most of it left
Pages: [1]
« previous next »