« previous next »
Pages: [1]

Author Topic: First two batches  (Read 2495 times)

0 Members and 1 Guest are viewing this topic.

Offline Hunts with stone

  • Member
  • Posts: 285
First two batches
« on: March 11, 2013, 09:00:43 pm »
I got around to making two Batches of birch bark oil. Some i'll use to treat bows and the rest will be made into pitch for halfting.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: First two batches
« Reply #1 on: March 11, 2013, 09:08:34 pm »
COOL! Now you gotta tell (and show) us how!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hunts with stone

  • Member
  • Posts: 285
Re: First two batches
« Reply #2 on: March 11, 2013, 09:54:53 pm »
Al righty then here goes. I got a large can from a Restaurant dumpster no lid. Get a smaller can soup can works good. Thake white paper birch bark cut it in strips that come almost to top. Stack and roll to fit. But first put a 1/4" hole in the center bottom of the big can. Fill it up but do not cover the drain hole. Take Heavy aluminum foil folded it three times and seal the top can. Make a fire ring on ground place small can in a hole cover it on all sides flush with ground. Be carfull and keep this can clean. Place big can on top so drain hole is over the other one. Scape some LOSE dirt around the bottom to make a seal. Try to get it all pretty level. Also you'll need sometimg to put over the tin foil like a steel sheet of any kind so the foil does'nt get a hole in it. And use the all tin cans!!! Start a fire around and over it burn a small fire on it for 2 hours letting it burn down. And wall laa you did it. You can use the oil as is or cook it down for glue.
Logged

Offline richardzane

  • Member
  • Posts: 500
  • active Wyandot tribal member
    • richardzanesmith.wordpress.com
Re: First two batches
« Reply #3 on: March 12, 2013, 10:35:29 pm »
thats great... that looks like a good supply too.
wished i knew of another tree besides birch (native to this area) that one might do the same thing with...
anyone have any luck using other bark?
Logged
when i'm working on things my ancestors worked, singing the songs my ancestors sang, dancing the same dances, speaking the same language, only then  I feel connected to the land, THIS land, where my ancestors walked for thousands of years...

Offline Don

  • Member
  • Posts: 331
Re: First two batches
« Reply #4 on: March 12, 2013, 10:53:11 pm »
That's cool. I was watching a youtube about making that just the other night.
Like to try that some time if I can find some trees.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: First two batches
« Reply #5 on: March 13, 2013, 12:42:55 am »
I know river birch (Betula niger) has similar bark but it exfoliates more. I know river birch makes good fire starter so it must have adequate amounts of pitch in it too. River birches are a more Southern variety where paper birch is Northern.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hunts with stone

  • Member
  • Posts: 285
Re: First two batches
« Reply #6 on: March 13, 2013, 07:37:53 am »
Quote from: Pat B on March 13, 2013, 12:42:55 am
I know river birch (Betula niger) has similar bark but it exfoliates more. I know river birch makes good fire starter so it must have adequate amounts of pitch in it too. River birches are a more Southern variety where paper birch is Northern.
.  Give it a try and let us know how it works out.
Logged
Pages: [1]
« previous next »