Author Topic: golden chain tree take down 53/28 (No. 21)  (Read 20857 times)

0 Members and 1 Guest are viewing this topic.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
golden chain tree take down 53/28 (No. 21)
« on: March 09, 2013, 05:43:27 pm »
This bow is made of billets, which are split out of an 40" and 3" diameter sapling. You sure know, golden chain tree has a wonderful contrast of heart and sap wood. So I decided to leave at least on tips and fade area a natural grown overlay of sap on the bow. Unfortunately the next ten or so rings just below the the sap were rather thin and very spongy because of the high ratio of early wood - I had to work down to the good rings.This is the reason for the relative high overlays and the high crowned limbs (back side of limb only about 1" away of pith center). Because of the high crown I decided next to try a hollow limb design again, in this case excessive. The limbs are only two rings thick, but heavily crowned / hollowed out. The back side has cured to a darker color than the belly and sides - it was laying around for months, belly and sides shows the fresh lighter color because of tillering. After a few further month the color of the heart wood will be a chocolate brown.
This is my first try on a take down. It is done with self made take down sleeves, which came out a bit too bulky for my taste. Next time I will try some smaller diameter pipes.

The billets were too small to fill the the depth of the sleeves, so i glued on some leftover pieces from this stave.

The lower limb looks a bit weird just below fade, but the bow is well balanced and shoots very good. I'm absolute surprised.

This bow pulls so smooth and is incredible fast - I don't know is it the extreme design or the bow wood. I will search for a small diameter osage and try the same design - then we will see ...

specs:
65,5" ntn
5" braceheight
53# / 28"
stingray leather inlayed as arrowpass
string: 6 strands of 452X strengthened at the ears

enjoy ...















































« Last Edit: December 19, 2014, 04:05:34 am by simson »
Simon
Bavaria, Germany

Offline Arrowind

  • Member
  • Posts: 1,428
Re: golden chain tree take down 53#/28"
« Reply #1 on: March 09, 2013, 05:47:53 pm »
That's amazing.  I love the tiller.  the concave belly is incredible.  The finish excellent.  beautiful colors.  Just amazing!
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline Dean Marlow

  • Member
  • Posts: 531
Re: golden chain tree take down 53#/28"
« Reply #2 on: March 09, 2013, 05:50:12 pm »
Now that is totally amazing. I still can't figure out how you could even tiller that bow. What beautiful wood. That is one of a kind for sure. Thank you for sharing. Dean

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: golden chain tree take down 53#/28"
« Reply #3 on: March 09, 2013, 05:50:39 pm »
That is one fine piece of work!! 8)
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline dwardo

  • Member
  • Posts: 1,456
Re: golden chain tree take down 53#/28"
« Reply #4 on: March 09, 2013, 06:00:58 pm »
Very special indeed very nice. Tell us more about the concave limbs please.
Stunner. 8)

Offline hatcha

  • Member
  • Posts: 246
Re: golden chain tree take down 53#/28"
« Reply #5 on: March 09, 2013, 06:09:17 pm »
That bow is stunning and beautifully finished!!

Are you worried that the grain run-off on each limb from the grip might cause it to split?  Or are the run-offs sufficiently away from any working/stressing wood?

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: golden chain tree take down 53#/28"
« Reply #6 on: March 09, 2013, 06:17:37 pm »
That is a beautiful bow. 
Howard
Gautier, Mississippi

Offline randman

  • Member
  • Posts: 647
Re: golden chain tree take down 53#/28"
« Reply #7 on: March 09, 2013, 06:26:20 pm »
Beautiful Simson! Love everything about it. Looks a lot like Black Locust. Those concave limbs are really influencing me. Got a couple I'm trying. What is the handle wrap material?
Beauty is in the eye of the beer holder.

Offline JonW

  • Member
  • Posts: 1,906
Re: golden chain tree take down 53#/28"
« Reply #8 on: March 09, 2013, 07:08:56 pm »
You sir are a true craftsman. Very nice bow.

Offline Gordon

  • Member
  • Posts: 3,299
Re: golden chain tree take down 53#/28"
« Reply #9 on: March 09, 2013, 07:09:43 pm »
Very nice Simson. The concave limb design is quite impressive. And the takedown system is nicely excecuted.
« Last Edit: March 09, 2013, 10:30:39 pm by Gordon »
Gordon

blackhawk

  • Guest
Re: golden chain tree take down 53#/28"
« Reply #10 on: March 09, 2013, 07:15:18 pm »
AWESOME! !!!!  :D

Offline bow101

  • Member
  • Posts: 2,235
Re: golden chain tree take down 53#/28"
« Reply #11 on: March 09, 2013, 07:16:54 pm »
       
Stupendous work, very nice, it takes much imagination to thrill the few....!!! "101"

"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: golden chain tree take down 53#/28"
« Reply #12 on: March 09, 2013, 07:29:29 pm »
Exquisite in every detail!
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: golden chain tree take down 53#/28"
« Reply #13 on: March 09, 2013, 07:34:44 pm »
That is so crazy in a very cool way!
45# at 27"

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: golden chain tree take down 53#/28"
« Reply #14 on: March 09, 2013, 07:46:40 pm »
Really nice, Simpson!  Are my eyes playing tricks?  Is that belly dished out?  Also, what finish did you use.  Its incredible.  Very cool!
Matt Wirwicki
Owosso, MI