Author Topic: New Guy - First Tiller - Help  (Read 3125 times)

0 Members and 2 Guests are viewing this topic.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: New Guy - First Tiller - Help
« Reply #15 on: March 08, 2013, 03:28:54 pm »
I wouldnt go too deep with your arrow shelf, with hickory you can go past center but i dont trust red oak that much. 1/2" to 3/4" would be as far as i would go.

Offline karaterick

  • Member
  • Posts: 51
Re: New Guy - First Tiller - Help
« Reply #16 on: March 08, 2013, 03:30:39 pm »

 Ok. Thanks for all of the great advice guys!!

Offline bushboy

  • Member
  • Posts: 2,256
Re: New Guy - First Tiller - Help
« Reply #17 on: March 08, 2013, 03:56:02 pm »
If you have to struggle at all to brace it,it's to heavy!I broke lots of bow trying to brace them when I first started out!i
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline karaterick

  • Member
  • Posts: 51
Re: New Guy - First Tiller - Help
« Reply #18 on: March 08, 2013, 10:05:35 pm »

 Thanks. I have one limb that seems a lot stiffer than the other. They should be pretty close in thickness though which seems weird, but I will have to put the calipers down across the limbs tomorrow to see.

Offline Dictionary

  • Member
  • Posts: 717
Re: New Guy - First Tiller - Help
« Reply #19 on: March 08, 2013, 10:08:04 pm »
If you have to struggle at all to brace it,it's to heavy!I broke lots of bow trying to brace them when I first started out!i


+1 on this.

It also induces unnecessary set.
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: New Guy - First Tiller - Help
« Reply #20 on: March 08, 2013, 10:13:40 pm »
Yes, too heavy at brace is not good. If you look at the buildalongs on my site I go through how to determine when the stave is ready for the short string. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline karaterick

  • Member
  • Posts: 51
Re: New Guy - First Tiller - Help
« Reply #21 on: March 09, 2013, 12:36:32 am »
Yes, too heavy at brace is not good. If you look at the buildalongs on my site I go through how to determine when the stave is ready for the short string. Jawge

I'm checking it out. Thanks!