Author Topic: Nice ERC  (Read 3397 times)

0 Members and 1 Guest are viewing this topic.

Offline Gsulfridge

  • Member
  • Posts: 1,573
Nice ERC
« on: March 07, 2013, 11:20:25 am »
I just received to nice ERC logs. Both are over 6' and pipe straight with no visible knots. After hearing all the horror stories, I'm hesitant to tackle them, but they sure are nice!
Greg Sulfridge, Lafollette, TN

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Nice ERC
« Reply #1 on: March 07, 2013, 11:27:23 am »
Those look great. ERC that nice is a rare find in my area. At least where i can cut any.
Steve Bennett

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Nice ERC
« Reply #2 on: March 07, 2013, 11:35:32 am »
Here's a pic of the heartwood.
Greg Sulfridge, Lafollette, TN

blackhawk

  • Guest
Re: Nice ERC
« Reply #3 on: March 07, 2013, 11:43:30 am »
Sure smells good to me  ;D

Offline autologus

  • Member
  • Posts: 1,092
Re: Nice ERC
« Reply #4 on: March 07, 2013, 12:02:11 pm »
You are wise to be hesitant and should not mess with them, you should send them to me immediately just in case you get the itch to try them.  I will be happy to save you from the ERC, again send them to me.   >:D

Grady
Proud Hillbilly from Arkansas.

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Nice ERC
« Reply #5 on: March 07, 2013, 12:08:11 pm »
Grady, would you trade me some ocean front property for them? ::)
Greg Sulfridge, Lafollette, TN

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Nice ERC
« Reply #6 on: March 07, 2013, 12:12:01 pm »
Very nice logs :) Never seen any pictures of straighter ERC than those! Decent amount of heartwood too, which is very nice on the belly of the bows.

You must seal the ends ASAP, though.
I would also recommend splitting them rather sooner than later, to prevent heart checks from drying round wood.
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Nice ERC
« Reply #7 on: March 07, 2013, 12:29:40 pm »
Those are some nice logs. Thing I can't figure out is how did it grow that straight without any knots. I got some straight stuff on my property but its got branches coming off all over it, so I been hesitant to cut it for bow wood. I think you should do well with those.   Danny
"You know a tree by the fruit it bears"   God

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Nice ERC
« Reply #8 on: March 07, 2013, 12:31:45 pm »
I sealed the ends with PVC glue. That's all I had handy. Sure made the color pop out!
Greg Sulfridge, Lafollette, TN

Offline autologus

  • Member
  • Posts: 1,092
Re: Nice ERC
« Reply #9 on: March 07, 2013, 12:38:31 pm »
Grady, would you trade me some ocean front property for them? ::)

Absolutely, right here in the heart of beautiful Arkansas.  :laugh:

Grady
Proud Hillbilly from Arkansas.

blackhawk

  • Guest
Re: Nice ERC
« Reply #10 on: March 07, 2013, 12:40:52 pm »
Very nice logs :) Never seen any pictures of straighter ERC than those! Decent amount of heartwood too, which is very nice on the belly of the bows.

You must seal the ends ASAP, though.
I would also recommend splitting them rather sooner than later, to prevent heart checks from drying round wood.

Don't split ERC...too soft...kerf cut with a circular saw at the very least...but cut the stuff out if you can...and I've left ERC to dry in the round with bark still on and never had an issue with checking...just sealed the ends n that's it.

Offline osagejack

  • Member
  • Posts: 167
Re: Nice ERC
« Reply #11 on: March 07, 2013, 12:43:53 pm »
looks very good,, cedar still scares me,,but some of the sweetest shooting bow I have ever shot were cedar I think the cedar is like yew you want very tight rings  a guy in Kentucky used to sinew back cedar and they were very nice bows,, his cedar was the purple colored stuff, how are the rings on these logs,

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Nice ERC
« Reply #12 on: March 07, 2013, 12:53:45 pm »
    very nice, seal it and forget it for ? how long?

                                                 chuck
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Nice ERC
« Reply #13 on: March 07, 2013, 01:19:18 pm »
Howdy,  I've always split juniper and found it very easy to debark and split cleanly.  Sawing a kerf on oppisite sides would work,too.  I just worry that you'll get checking and splits if you don't.  Although rare, there is at least one variety of wood wasp that will attack bark-on staves.  Debark now or spray with insecticide.  Ron
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline autologus

  • Member
  • Posts: 1,092
Re: Nice ERC
« Reply #14 on: March 07, 2013, 01:36:40 pm »
How long does it usually take to dry ERC to a workable state?  I have some ERC that is nice and clean from a cluster drying and was wondering.

Grady
Proud Hillbilly from Arkansas.