« previous next »
Pages: [1]

Author Topic: Tiller check  (Read 2219 times)

0 Members and 1 Guest are viewing this topic.

Offline Ozzy

  • Member
  • Posts: 543
Tiller check
« on: March 02, 2013, 02:58:07 pm »
its a maple backed walnut 69 ttt 5" brace with a 16 in stick in it
thanks
Logged
THE BEST SUNRISES ARE SEEN 20 FEET UP A TREE.

Offline bow101

  • Member
  • Posts: 2,235
Re: Tiller check
« Reply #1 on: March 02, 2013, 03:38:34 pm »
So far so good. If you have a long string get'er tillered more and put a short string on it and get 'er so it's safely pulling to around 24" without over pulling beyond your draw weight and without any hinging. I imagine you are wanting 50#...? ::)
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bushboy

  • Member
  • Posts: 2,256
Re: Tiller check
« Reply #2 on: March 02, 2013, 03:41:22 pm »
I would get the outter limbs bending more before the inner limb begin to take set,but that just the way I tiller.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Tiller check
« Reply #3 on: March 02, 2013, 05:50:10 pm »
I'd say the inner limbs are work ing fine, leave 'em be and start to get the mid/outer moving.
Del
Logged
Health warning, these posts may contain traces of nut.
Pages: [1]
« previous next »