Author Topic: looking to make a recurve bow.  (Read 1991 times)

0 Members and 1 Guest are viewing this topic.

Offline rileyhweiss

  • Member
  • Posts: 2
looking to make a recurve bow.
« on: February 27, 2013, 12:17:11 am »
hey there, Im looking to make a strong recurve bow, with pull back up in the 90s to 100. what would be the best wood to make it with, and how many layers?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: looking to make a recurve bow.
« Reply #1 on: February 27, 2013, 12:21:33 am »
One layer of osage!    How many bows have you built?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline rileyhweiss

  • Member
  • Posts: 2
Re: looking to make a recurve bow.
« Reply #2 on: February 27, 2013, 12:32:43 am »
none yet, i want to make a laminated recurve.

Offline bushboy

  • Member
  • Posts: 2,256
Re: looking to make a recurve bow.
« Reply #3 on: February 27, 2013, 12:39:19 am »
Best to learn how to walk before you run!start with learning a bit bout bow constructionis the best way to go.  And over confidencE. Is not a humble way to start!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline TacticalFate

  • Member
  • Posts: 234
Re: looking to make a recurve bow.
« Reply #4 on: February 27, 2013, 12:45:50 am »
Yup, start by reading about making wood bows; woods, construction techniques, etc. there's plenty on the internet. I'm sure you'll get this again, but try making a board selfbow or two before you delve into laminates, to learn tillering. We're all willing to help here :)
« Last Edit: February 27, 2013, 12:53:33 am by TacticalFate »

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: looking to make a recurve bow.
« Reply #5 on: February 27, 2013, 01:11:47 am »
Why a laminate?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gordon

  • Member
  • Posts: 3,299
Re: looking to make a recurve bow.
« Reply #6 on: February 27, 2013, 01:15:27 am »
That's a tall order for your first bow.
Gordon

Offline Newindian

  • Member
  • Posts: 734
Re: looking to make a recurve bow.
« Reply #7 on: February 27, 2013, 01:25:59 am »
Have you shot a bow that heavy before?
you should also consider that a most people's first bows come in way under weight
And that making a recurve ain't easy and laminating won't make it easyier. A single piece of wood (maybe with a backing) can do the same just as well. As far as wood Osage and yew are always nice but so are ocean spray, elm, black locusts, white oak, juniper, ash, hickory, lemon wood, maple, bamboo( that's grass though) mulberry, list goes on and on. It will really come down to what design you want. But you really need to research and build a few bows before taking on so large a task.
I like free stuff.

Offline Newindian

  • Member
  • Posts: 734
Re: looking to make a recurve bow.
« Reply #8 on: February 27, 2013, 01:27:46 am »
It sounds like you want to make a heavier modern recurve
I like free stuff.

mikekeswick

  • Guest
Re: looking to make a recurve bow.
« Reply #9 on: February 27, 2013, 05:59:21 am »
90 - 100 lb recurve for your first bow.......I think you will struggle unless you can find somebody experienced to stand by your shoulder the whole way.
My 2nd bow was a recurve at 65lb. It's possible but not easy.

blackhawk

  • Guest
Re: looking to make a recurve bow.
« Reply #10 on: February 27, 2013, 07:45:49 am »
Learn how to tiller on one piece of wood first....tillering is #1 and the hardest thing for most folks to learn how to do...