« previous next »
Pages: [1]

Author Topic: Cane Build  (Read 2061 times)

0 Members and 1 Guest are viewing this topic.

Offline Mikeeeeeeeeee

  • Member
  • Posts: 40
Cane Build
« on: February 23, 2013, 01:13:26 pm »
Began my first try this morning. Here is where I am.
4 shafts, straight, sanded, cut to length.
Lowes garden stakes, large ends are 10MM.
Logged

Offline Mikeeeeeeeeee

  • Member
  • Posts: 40
Re: Cane Build
« Reply #1 on: February 23, 2013, 03:53:43 pm »
I have my first ever arrow complete.
10MM large end.
Chicken feather fletching. (Compliments of a Red Ranger rooster that is scheduled for the auction next week)
All wrappings done with cotton thread, soaked with carpenter's glue.
Fletchings wrapped at both ends, then glued with carpenter's glue along the shaft.
Galvanized 12D 3" nail for a target point, glued in with Gorilla glue.
Nodes and shaft sanded with 240 grit.
Sealed with acrylic matte finish sealer.
Decorated with Red/Blue/Red rings.

Logged

Offline Matt G.

  • Member
  • Posts: 149
Re: Cane Build
« Reply #2 on: February 23, 2013, 07:21:07 pm »
Great job!
Logged
Keeping the Faith!
Matt

Offline Mikeeeeeeeeee

  • Member
  • Posts: 40
Re: Cane Build
« Reply #3 on: February 23, 2013, 09:04:29 pm »
Thanks Matt.   :)
Logged

Offline Youngboyer2(billyf)

  • Member
  • Posts: 487
  • Live by the man-née and the sa-wa.
Re: Cane Build
« Reply #4 on: February 23, 2013, 09:09:21 pm »
That is a great buildalong, and as this post shows it teaches people to make great arrows...  How long did it take to sand the nodes with 240 grit sandpaper?
Logged
"You speak Treason!" "Fluently"-Robin of Locksley
When people ask "why didn't you do that the first time" you can be sure that they  have never made a bow before.

Offline Mikeeeeeeeeee

  • Member
  • Posts: 40
Re: Cane Build
« Reply #5 on: February 23, 2013, 09:36:05 pm »
A few minutes per node.
Lay the paper on the table, slowly rotating the shaft while going back and forth with the shaft.
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Cane Build
« Reply #6 on: February 23, 2013, 09:41:15 pm »
Nice looking arrow.
Rob
Logged

Offline Youngboyer2(billyf)

  • Member
  • Posts: 487
  • Live by the man-née and the sa-wa.
Re: Cane Build
« Reply #7 on: February 24, 2013, 12:37:43 am »
Quote from: Mikeeeeeeeeee on February 23, 2013, 09:36:05 pm
A few minutes per node.
Lay the paper on the table, slowly rotating the shaft while going back and forth with the shaft.

I wrapped 60 grit around the cane and sanded the whole length, then smoothed it with 120, took 2 min per arrow. Be careful with that bamboo dust, it's especially bad for your lungs

-billy
Logged
"You speak Treason!" "Fluently"-Robin of Locksley
When people ask "why didn't you do that the first time" you can be sure that they  have never made a bow before.
Pages: [1]
« previous next »