Author Topic: Cholla Knife - Finished  (Read 8635 times)

0 Members and 1 Guest are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: Cholla Knife
« Reply #30 on: November 18, 2012, 12:59:51 pm »
Can't wait to see the end product George that is looking really really cool.

Jon

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Cholla Knife
« Reply #31 on: December 01, 2012, 11:38:40 pm »
Finished up the cholla knife today.  The finish is semi-gloss poly, 6 coats.





Didn't get the best glue line on the mesquite cap, the cholla is so soft it's hard to keep it steady enough on the sander.

George
St Paul, TX

Offline Tortoise

  • Member
  • Posts: 162
Re: Cholla Knife - Finished
« Reply #32 on: December 02, 2012, 01:44:58 am »
Alright!!! Nice work!!
-Peter
Arizona

Offline bubby

  • Member
  • Posts: 11,054
Re: Cholla Knife - Finished
« Reply #33 on: December 02, 2012, 02:09:49 am »
good to see the finished pics, look's great george, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Tower

  • Member
  • Posts: 2,298
Re: Cholla Knife - Finished
« Reply #34 on: December 02, 2012, 05:08:32 am »
Very nice George.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Cholla Knife - Finished
« Reply #35 on: December 02, 2012, 07:44:34 am »
George that looks great!  I have a peice of that wood around here some where.
(:::.) The ABO path is a new frontier to the past!

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Cholla Knife - Finished
« Reply #36 on: December 02, 2012, 09:18:09 am »
Thanks guys.  I wish I could make longer blades, but I guess all things in time.  I have a lovely blade from Scott I intend to haft up next.  Be awhile though with deer season still on and the freezer pretty low.

George
St Paul, TX

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Cholla Knife - Finished
« Reply #37 on: December 02, 2012, 10:36:09 am »
George that came out way nice great job.
Knapper
Ad Dare Servire
PM104250

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Cholla Knife - Finished
« Reply #38 on: December 02, 2012, 01:54:42 pm »
I did my knife about the same way but used good ole J B Weld to fill the handle, think I'll epoxy on the next one. I like the mesquite cap on yours. Bob

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Cholla Knife - Finished
« Reply #39 on: December 02, 2012, 03:36:41 pm »
George you do some nice work.
Rob

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Cholla Knife - Finished
« Reply #40 on: December 02, 2012, 03:59:12 pm »
Thank you guys, I am just copying Bubby. :) 

George
St Paul, TX

Offline Josh B

  • Member
  • Posts: 3,741
Re: Cholla Knife - Finished
« Reply #41 on: December 03, 2012, 09:53:55 am »
That came out great George!  Well done sir!  Josh

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Cholla Knife - Finished
« Reply #42 on: December 06, 2012, 03:28:48 am »
 8)  Very Nice!
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline seider

  • Member
  • Posts: 263
Re: Cholla Knife - Finished
« Reply #43 on: December 06, 2012, 10:28:53 pm »
Great job looks great
Now is the time for all good men to come to the aid of there country.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Cholla Knife - Finished
« Reply #44 on: February 22, 2013, 08:09:31 pm »
  I did two things both work good.
  One is epoxy.
  On a couple I made the tang longer to almost the end inch short. Welded a small nut on the end of the tang. Holloew out the center so nut fits through.  Then put a washer on cut down screw the right size so when you tighten down the screw. The washer tighten down on the back of the handle. Tightening the handle down. Cut and add a end cap.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING