Ok, next thing after that is to wax it. For this, I take a bit of beeswax and some cheese cloth. What I do is get the beeswax just a bit warm with a hair drier, and than rub it on the bow by hand. If you just soak the cheese cloth with molten beeswax, you can get smudges and stuff on your bow. The way I do it anyway. I don't heat it to soak it in the bow, if I did that than it probably wouldn't matter. But I prefer a lighter coat of beeswax, as I think the best looking wax finish is a relatively thin coat. Now for a bow that will see alot of weathering, I will do a couple healthy coats of tung oil first before waxing. This one is going to be just beeswax. I rub the beeswax in by hand, by taking the cheese cloth with the beeswax on it, and rubbing it up and down the limbs until it is coated pretty good. Then I take a clean piece of cheese cloth, and buff it up real quick. And then repeat maybe if it needs it.
Well this bow is complete, but I will have to wait till Thursday or so until I can take some full draw photos, as my
ultimate lithium batteries are all dead and I won't be able to get some till then, but here are a couple photos I got taken today before they died. Rod, please let me know what you think of the nocks, I tried my best to get rid of the step I had before, although I do know they are pretty darn oversized for the bow,
.