« previous next »
Pages: [1]

Author Topic: Receiver Hitch Vise Stand?  (Read 1814 times)

0 Members and 1 Guest are viewing this topic.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Receiver Hitch Vise Stand?
« on: February 12, 2013, 05:24:28 pm »
Hi Y'all,

I'm hunting for a Receiver Hitch Vise Stand...
Know I've seen em but can't remember where.
Been searching the web looking but most of the pieces I have seen were Way too short for stand-up stave work.

Looking for something with height adjustment or that would put the jaws of the vice at about 32" to 34" high.

Think I've even seen one here on PA but haven't found it in the search engine...
Guess I'm not using the right words to search...   ::)

Thinking towards the Tennessee Classic, would like to have a work area for building, without taking up valuable room in the shop...

Thank You,

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Receiver Hitch Vise Stand?
« Reply #1 on: February 12, 2013, 07:22:47 pm »
Gus, if I can make it to Cross Plains I will bring some two inch tubing and weld you one up :).
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Receiver Hitch Vise Stand?
« Reply #2 on: February 12, 2013, 08:35:10 pm »
Quote from: cowboy on February 12, 2013, 07:22:47 pm
Gus, if I can make it to Cross Plains I will bring some two inch tubing and weld you one up :).

Well Dang It Sir!
That would be Awesome...   :)

If it pans out please let me know what you might need in return...
Hopefully we'll be breaking Rock up state Soon!

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Receiver Hitch Vise Stand?
« Reply #3 on: February 13, 2013, 12:23:32 am »
Contact Keenan. He is(was) a metal fabricater and a bowyer.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »