« previous next »
Pages: [1]

Author Topic: Laurel for Blackhawk  (Read 2174 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Laurel for Blackhawk
« on: February 10, 2013, 03:07:09 pm »
OK Chris, here is the first laurel stave for you. It is about 62" long and 2" in diameter and quite straight for Mt Laurel. I'll be cutting more as I find it. I'll get you 3 or 4 to play with.




Here are a few pics of laurel in the wild. You can see what I have to work with...


...and lots of interesting shapes. We always thought these two would make a great thrown...
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Squirrelslayer

  • Member
  • Posts: 529
Re: Laurel for Blackhawk
« Reply #1 on: February 10, 2013, 03:10:57 pm »
some crazy staves there i hope blackhawk does a build along with one of theese staves!
Logged
WARNING: posts may contain nuts.

http://squirrelslayers.forumshome.com/ - check out my forum, and if you like what you see... Join!

also on YouTube

https://www.youtube.com/user/cj822100?feature=mhee

blackhawk

  • Guest
Re: Laurel for Blackhawk
« Reply #2 on: February 10, 2013, 03:18:11 pm »
 >:D  >:D  >:D  ;D......awesome pat....thanks a billion brother  ;)

that looks like about as good as they come  ::)  tough to find em ...I know that's not an easy task....and im sure your having fun getting bashed by the stuff crawling around in it looking for bow staves   8) I see some rosebay rhodo in there too
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Laurel for Blackhawk
« Reply #3 on: February 10, 2013, 03:26:16 pm »
We have Rhodo catawbiense(Catawba rhodo) and Rhodo minus growing wild here and I have planted hybrids and English roseum Rhodo.
  We have paths through lots of these laurel hells so it ain't too bad. I just cut the section i want and leave the rest of it entertwined with the rest of um.  ;D
  This one has been sealed and dated.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Laurel for Blackhawk
« Reply #4 on: February 10, 2013, 03:30:28 pm »
I don't know what looks better, that stave or your deer! Man you sure shot that thing up! Good luck with that stave blackhawk.
Logged

Offline Squirrelslayer

  • Member
  • Posts: 529
Re: Laurel for Blackhawk
« Reply #5 on: February 10, 2013, 03:55:25 pm »
Quote from: paulsemp on February 10, 2013, 03:30:28 pm
I don't know what looks better, that stave or your deer! Man you sure shot that thing up! Good luck with that stave blackhawk.

it is a deer :o i thought it was some kind of stump, i really should wear some glasses >:D
Logged
WARNING: posts may contain nuts.

http://squirrelslayers.forumshome.com/ - check out my forum, and if you like what you see... Join!

also on YouTube

https://www.youtube.com/user/cj822100?feature=mhee

Offline steelslinger

  • Member
  • Posts: 242
Re: Laurel for Blackhawk
« Reply #6 on: February 10, 2013, 09:03:41 pm »
I found a patch of this stuff a few years ago while hunting. some of them were more than 20' tall with pretty straight trunks. I will have to see if I can find them again.
Logged

blackhawk

  • Guest
Re: Laurel for Blackhawk
« Reply #7 on: February 10, 2013, 09:29:26 pm »
I must be sick,crazy,n twisted as that stave cus I'm paying the man in gold for that junk...lol :laugh:  ;D
Logged

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Laurel for Blackhawk
« Reply #8 on: February 10, 2013, 10:14:16 pm »
I can't wait to see what you do with that. 
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline coaster500

  • Member
  • Posts: 1,741
Re: Laurel for Blackhawk
« Reply #9 on: February 10, 2013, 11:10:47 pm »
Ya missed a few Pat :)

Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Laurel for Blackhawk
« Reply #10 on: February 11, 2013, 01:19:02 am »
Kip, if I took the pic from a different angle you would change your mind.  ;)
  I was looking for larger diameter but what I found grows with an oval cross section with the narrow section being the tension/compression sides. If you tried to use the flatter sides for a bow it would be one side of the limb compression and one side tension. It would probably twist like crazy.  We have some here that is 6" in diameter.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »