Author Topic: Can't get started in making a bow  (Read 46696 times)

0 Members and 1 Guest are viewing this topic.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #30 on: February 13, 2013, 09:00:47 pm »
Noted, what should I do once my string is made?
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #31 on: February 13, 2013, 09:20:41 pm »
Can you flex the bow at all yet? Put a tip in the ground and grab the upper tip with your left hand while pushing at the center with your right hand. It should flex decently.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #32 on: February 14, 2013, 05:33:30 pm »
I made a string that's about 67" with the know in, it hangs on the bow with about 11" of slack. The bow also bend pretty nicely when I do that
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #33 on: February 14, 2013, 05:46:19 pm »
Great. Put the bow up on your tree and pull the string down to a notch that moves your tips at least a 3-4 inches. Then snap a pic.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #34 on: February 14, 2013, 05:59:57 pm »

Sorry if its hard to tell, I need to get around to building a proper hollering tree
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Can't get started in making a bow
« Reply #35 on: February 14, 2013, 06:34:15 pm »
the whole outer limb on each side is stiff, almost all the bend if not all is in the handle right now, so basically you should mark all the stiff spots on the limb and then scrape it off, then repeat, rinse repeat, ect. Like i said, the bow isnt bending at all in the limbs except maybe in the fades, not sure, but leave the handle and maybe a few inches out till you get it bending more in each limb.
Amo innectis arcus- I love crafting bows (latin)

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #36 on: February 14, 2013, 06:36:16 pm »
Pull it down 3" more.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #37 on: February 14, 2013, 06:41:10 pm »
I forgot to mention you need to round of the sharp edges on your back, both sides, end to end. Give them a decent rounding, not quite pea size.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #38 on: February 14, 2013, 06:58:16 pm »
muffin there are no fades, its a bendy handle bow. Its supposed to work.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Can't get started in making a bow
« Reply #39 on: February 14, 2013, 07:18:41 pm »
yep, i call em fades anyways cus i always make my bow have a deeper handle and then i just fade out to the regular width, i make all my bows bend in the handle because it seems to be less hassle, but thats just me.
Amo innectis arcus- I love crafting bows (latin)

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #40 on: February 14, 2013, 07:49:00 pm »

Sand em down or just rasp em out a bit?
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #41 on: February 14, 2013, 09:43:53 pm »
Rasp, then round them nicely with a sanding block.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Can't get started in making a bow
« Reply #42 on: February 14, 2013, 09:48:50 pm »
Here is a build a long that might provide you with some helpful information.

http://www.primitivearcher.com/smf/index.php/topic,3895.0.html
Gordon

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #43 on: February 14, 2013, 10:11:07 pm »
Rasp, then round them nicely with a sanding block.
and as for the tiller?
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #44 on: February 14, 2013, 10:37:43 pm »
Not alot of bending yet. Do you have scales?
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.