Author Topic: removing sinew(update on page two)  (Read 2554 times)

0 Members and 1 Guest are viewing this topic.

Offline seabass

  • Member
  • Posts: 2,267
Re: removing sinew
« Reply #15 on: February 09, 2013, 12:46:14 am »
thanks guys.i don't have a tub(standup shower).i guess i'll just keep wetting it down and scrape it off.i've got nothing to loose.
Middletown,Ohio

Online Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: removing sinew
« Reply #16 on: February 09, 2013, 12:51:42 am »
I removed the sinew from the little yew paddle bow I broke last year by wrapping it in a wet towel and let it soften for an hour or so. I them started peeling the sinew up from the tips.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline seabass

  • Member
  • Posts: 2,267
Re: removing sinew
« Reply #17 on: February 09, 2013, 12:53:03 am »
thanks Pat.i will give it a whirl.
Middletown,Ohio

Online Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: removing sinew
« Reply #18 on: February 09, 2013, 12:55:38 am »
Time limits may vary!  :D
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: removing sinew
« Reply #19 on: February 09, 2013, 01:03:49 am »
that's the one.  Sorry Pat.  I got your bows mixed up.
I started out with nothin' and I still got most of it left

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: removing sinew
« Reply #20 on: February 09, 2013, 01:55:02 am »
I have sinew that lifted from a short, snakey osage I've been working.  So, I need to remove it also, and try again.  I"m thinking of getting a large pvc pipe, capping one end and soaking it for a day or 2.  Then sealing the osage stave so it doesn't dry out too quickly and check.
Dave   Richmond, KY
26" draw

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: removing sinew
« Reply #21 on: February 09, 2013, 08:37:18 am »
Steve I hope I never have to take it off a bow. Sounds to "worky" to me! Good luck and let us know which direction you take and how it panned out.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Online Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: removing sinew
« Reply #22 on: February 09, 2013, 10:51:37 am »
No problem Clint, you weren't too far off. I had to remove the sinew from Elkie also but it just peeled off in sheets. Unfortunately I had added TBIII over the top so it limited how much sinew I could recover.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: removing sinew
« Reply #23 on: February 09, 2013, 11:54:29 am »
Here's view and probably won't work but maybe someone has done it.Can you remove a propeller in a limb that is sinewed with heat?
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline seabass

  • Member
  • Posts: 2,267
Re: removing sinew
« Reply #24 on: February 09, 2013, 12:33:12 pm »
Chris,i will let you know how it turns out.
Middletown,Ohio

Offline seabass

  • Member
  • Posts: 2,267
Re: removing sinew
« Reply #25 on: February 11, 2013, 07:10:24 pm »
well,i took Pats advice and it worked.thanks Pat.it wasn't as hard as i thought it would be.some spots were a little tough,but i aien't complaining.here is a pic.thanks again Pat.
Middletown,Ohio

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: removing sinew(update on page two)
« Reply #26 on: February 11, 2013, 07:34:43 pm »
Looks good Stevie. You can pretty much take Pats advice to the bank......................................most of the time.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline seabass

  • Member
  • Posts: 2,267
Re: removing sinew(update on page two)
« Reply #27 on: February 11, 2013, 07:41:31 pm »
lots of wisdom comming out of that beard Chris.work like a charm.
Middletown,Ohio