« previous next »
Pages: [1]

Author Topic: Titebond 3 temp  (Read 2995 times)

0 Members and 1 Guest are viewing this topic.

Offline snedeker

  • Member
  • Posts: 905
Titebond 3 temp
« on: October 25, 2007, 12:17:58 pm »
Its supposed to be in the low 60s out here Sat. and I was thinking of doing a glue up at my outside workshop.  Usually, I only use TB if its high 60s or warmer, although I see the directions say down to 47 is ok.  To me, it seems like it starts to act a little funny if its cooler.  Think low 60s is safe?

Dave
« Last Edit: October 25, 2007, 12:20:26 pm by snedeker »
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,917
  • if you have to ask you wouldn't understand ,Tenn.
Re: Titebond 3 temp
« Reply #1 on: October 25, 2007, 12:28:07 pm »
Never done a whole glue up but have done a lot of Tip over lays, skins and rawhide such with no problem,I love TB3.Use it on about everything. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,544
Re: Titebond 3 temp
« Reply #2 on: October 25, 2007, 01:03:14 pm »
Dave, I have dine glue-ups in my basement in the 40s and low 50s with no problems. The glue seems a bit thick at those temps so be sure you get good coverage.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline snedeker

  • Member
  • Posts: 905
Re: Titebond 3 temp
« Reply #3 on: October 25, 2007, 02:32:09 pm »
Thanks.  I'll prbably give it a go.
Logged
Pages: [1]
« previous next »