Author Topic: D/R osage stave build-a-long  (Read 19038 times)

0 Members and 2 Guests are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: D/R osage stave build-a-long
« Reply #60 on: February 03, 2013, 06:16:58 pm »
I finally got back to work on my bow today.  I screwed some scrap pieces to the back of the caul so I could do a little string alignment while I was reflexing it.  I also removed some twist from the limb.  It is a little scary bending wood this much but osage seems to tolerate it.  I had to work around three bumped up pin knots.  One of the knots is near the tip.  It lifted a small island of a growth ring when I bent it.  I left them plenty heavy so I should be able to remove it.  Just in case I soaked it with thin superglue.  I should have paid more attention and scraped it down to a single ring on the tip.  The other limb only has 1 small pin knot so it should be a little easier.





I started out with nothin' and I still got most of it left

blackhawk

  • Guest
Re: D/R osage stave build-a-long
« Reply #61 on: February 03, 2013, 07:20:43 pm »
Looking good pal...looks like you'll have 3-3 1/2" of reflex to start with when ya finish off the other limb....:)

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: D/R osage stave build-a-long
« Reply #62 on: February 03, 2013, 07:44:33 pm »
Is that about about right?
I started out with nothin' and I still got most of it left

blackhawk

  • Guest
Re: D/R osage stave build-a-long
« Reply #63 on: February 03, 2013, 08:01:53 pm »
Yeah...cus you'll prob end up with 1/2"-1" of reflex when all is said and done if done right  ;)

Offline seabass

  • Member
  • Posts: 2,267
Re: D/R osage stave build-a-long
« Reply #64 on: February 03, 2013, 08:29:15 pm »
looking good Clint.
Middletown,Ohio

Offline Will H

  • Member
  • Posts: 2,120
Re: D/R osage stave build-a-long
« Reply #65 on: February 03, 2013, 09:00:54 pm »
Lookin sweet man :)
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: D/R osage stave build-a-long
« Reply #66 on: February 03, 2013, 09:02:32 pm »
oh yeah, I'm watching this one close.
Dave   Richmond, KY
26" draw

Offline Ozzy

  • Member
  • Posts: 543
Re: D/R osage stave build-a-long
« Reply #67 on: February 03, 2013, 10:02:25 pm »
Looking good Clint  ;D
THE BEST SUNRISES ARE SEEN 20 FEET UP A TREE.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: D/R osage stave build-a-long
« Reply #68 on: February 04, 2013, 01:24:53 am »
Man that Yeller Wood is really shaping up...

I'll be a watchin' your next turn.  :)

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: D/R osage stave build-a-long
« Reply #69 on: February 04, 2013, 01:28:13 pm »
I took it off the caul today and it looks pretty good.  I flipped it around and started on the other side.  I tried to get everything alligned and untwisted in one go at it.  I will probably have to tweek it a little here and there to get lined up.  My rocking chair caul turned out pretty decent.  It's not a Blackhawk model 52 caul but it will work  ;D 

It is starting to take some shape now.  I am going to need some major advice when I start tillering this thing.



I started out with nothin' and I still got most of it left

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: D/R osage stave build-a-long
« Reply #70 on: February 04, 2013, 01:36:35 pm »
Im scared of tillering those bows......dont ask me for help buddy!
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: D/R osage stave build-a-long
« Reply #71 on: February 04, 2013, 01:53:52 pm »
Don't ask me either...cus I just get lucky with mine sometimes  ;D

Ya know I think I hear that stave saying recurve me,then sinew back me into some serious reflex >:D

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: D/R osage stave build-a-long
« Reply #72 on: February 04, 2013, 02:06:53 pm »
Looks good, I'm also interested in seeing it on the tillerboard ...
good luck!
Simon
Bavaria, Germany

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: D/R osage stave build-a-long
« Reply #73 on: February 04, 2013, 02:08:56 pm »
Ya know I think I hear that stave saying recurve me,then sinew back me into some serious reflex >:D

That's funny cause I sure dont  ;D  I think I pushed the tips as far as I want to take them.
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: D/R osage stave build-a-long
« Reply #74 on: February 05, 2013, 05:25:43 pm »
I took it of the caul today.  I am loving the curves on this thing.  The string lines up on the edge of the handle do I might have to make one little adjustment. 





And Blackhawk, you were dead on the money.  3" of reflex right now.

I started out with nothin' and I still got most of it left