« previous next »
Pages: [1]

Author Topic: Will these horns work for ELB horn nocks?  (Read 1940 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Will these horns work for ELB horn nocks?
« on: January 21, 2013, 10:50:33 am »
Will these horns work for ELB horn nocks? They look like they are spitting between the layers, is this normal? I've never made elb horn nocks from raw horn, so I don't know... These are supposed to be 3" - 5" long.

Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Will these horns work for ELB horn nocks?
« Reply #1 on: January 21, 2013, 10:57:22 am »
           yes and for so much more

                                        chuck
Logged
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Will these horns work for ELB horn nocks?
« Reply #2 on: January 21, 2013, 11:04:47 am »
Sometimes cow horns will do that.I have not seen gemsbok or water buffalo do it yet.I would say they would be ok yet as long as the very center is'nt split any.Have fun.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline adb

  • Member
  • Posts: 5,339
Re: Will these horns work for ELB horn nocks?
« Reply #3 on: January 21, 2013, 11:17:14 am »
I don't think you'd really know until you tried one. I'd be a bit concerned with the layer seperation.
Logged
Pages: [1]
« previous next »