« previous next »
Pages: [1]

Author Topic: how long when using steam?????  (Read 2186 times)

0 Members and 1 Guest are viewing this topic.

Offline Shondy55

  • Member
  • Posts: 78
how long when using steam?????
« on: May 13, 2013, 05:30:49 pm »
Hey guys,
when you are using a stove top to steam bend a bow about how long do you steam the bow until you put it in the recurve form? and also do you put the belly of the bow down (steam hitting the belly) when steaming or do you put the back down.

            -Shondy
Logged
Go O' seeker and may your quest be not in vain

Offline bubby

  • Member
  • Posts: 11,054
Re: how long when using steam?????
« Reply #1 on: May 13, 2013, 05:37:01 pm »
I put the belly down and go 1 hr
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: how long when using steam?????
« Reply #2 on: May 13, 2013, 05:42:44 pm »
30 minute per 1/2" thickness.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: how long when using steam?????
« Reply #3 on: May 13, 2013, 05:45:45 pm »
You can take those two fellas word to the bank.Go for it.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline dwardo

  • Member
  • Posts: 1,456
Re: how long when using steam?????
« Reply #4 on: May 13, 2013, 05:50:31 pm »
Just remember that you only have seconds to get it bent or clamped.
Sounds daft but I find it best to practice the "run" from pan to form so you can get it in one fluid motion.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: how long when using steam?????
« Reply #5 on: May 13, 2013, 07:09:02 pm »
I get my clamps set and do a practice run every time. Try to make your bend in one motion. You have about 15 seconds from the pot .








Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Badger

  • Member
  • Posts: 8,124
Re: how long when using steam?????
« Reply #6 on: May 13, 2013, 07:12:22 pm »
  I started using 1 hour for everything and it seems to work a bit better.
Logged

Offline DuBois

  • Member
  • Posts: 2,020
Re: how long when using steam?????
« Reply #7 on: May 14, 2013, 03:43:47 am »
So, how long do you wait to start tillering again after steaming?
Logged

Offline dwardo

  • Member
  • Posts: 1,456
Re: how long when using steam?????
« Reply #8 on: May 14, 2013, 07:04:00 am »
Quote from: DuBois on May 14, 2013, 03:43:47 am
So, how long do you wait to start tillering again after steaming?

Weight the bow before you steam it and then wait until its back upto weight after the steaming.
I forget to do this pretty much every bloody time so i just give it a few days.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: how long when using steam?????
« Reply #9 on: May 14, 2013, 09:18:15 am »
About 3-4 hours for me. Sometimes less and sometimes more. It depends on what else I have cooking at the moment.
« Last Edit: May 14, 2013, 09:24:16 am by PEARL DRUMS »
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JeremiahVires

  • Member
  • Posts: 112
Re: how long when using steam?????
« Reply #10 on: May 14, 2013, 10:37:18 am »
When I steam wood, I put it on high and let it come to a fast boil, then steam it for an hour and a half.  As it's boiling, i set up my press and clamps.  Then after an hour or hour and a half of boiling, I pull it out fast and clamp it down as fast as I can, then let it set in the press for a week, then I go back a week later, and do the other side (If what I'm doing is recurving the tips).

Its quite easy really.  Just a bit time consuming.
Logged
I could take over the world...  Just need a few more million minions...

Offline steve b.

  • Member
  • Posts: 999
Re: how long when using steam?????
« Reply #11 on: May 14, 2013, 11:01:05 am »
Would it help to keep a heat gun going on the bow while taking your time to clamp it in place? 
Logged

Offline JeremiahVires

  • Member
  • Posts: 112
Re: how long when using steam?????
« Reply #12 on: May 14, 2013, 11:17:18 am »
Not really.  It doesn't make a difference.
Just get the bow onto the form within 5-10 minutes and you'll be good to go.
Logged
I could take over the world...  Just need a few more million minions...
Pages: [1]
« previous next »