« previous next »
Pages: [1]

Author Topic: Will it work  (Read 3264 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Will it work
« on: January 12, 2013, 08:29:13 pm »
Anybody make a bow 1" wide. And not a youth bow.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

blackhawk

  • Guest
Re: Will it work
« Reply #1 on: January 12, 2013, 08:31:17 pm »
Yup
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Will it work
« Reply #2 on: January 12, 2013, 08:32:25 pm »
Osage or ipe would easily make a hunting weight bow at only one inch wide. What kind of wood do you have?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline okie64

  • Member
  • Posts: 1,134
Re: Will it work
« Reply #3 on: January 12, 2013, 08:37:31 pm »
Ive made a few osage and one hickory an inch wide.
Logged

Offline seabass

  • Member
  • Posts: 2,267
Re: Will it work
« Reply #4 on: January 12, 2013, 08:40:17 pm »
i say go for it.especially if it is osage.good luck buddy.
Logged
Middletown,Ohio

Offline sleek

  • Member
  • Posts: 6,764
Re: Will it work
« Reply #5 on: January 12, 2013, 08:42:56 pm »
yup, and I think you are the winner for the most vague question ever.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline kevinsmith5

  • Member
  • Posts: 287
Re: Will it work
« Reply #6 on: January 12, 2013, 09:17:12 pm »
Depends

(attempting to win vaguest answer ever)
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Will it work
« Reply #7 on: January 12, 2013, 09:21:43 pm »
I'm working on a hickory flat bow that is 1 1/4" wide right now.
Logged

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: Will it work
« Reply #8 on: January 12, 2013, 09:30:38 pm »
Quote from: kevinsmith5 on January 12, 2013, 09:17:12 pm
Depends

(attempting to win vaguest answer ever)

Winner! Do you want a medal or a cookie?  >:D

Jon
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: Will it work
« Reply #9 on: January 12, 2013, 09:40:13 pm »
I hope he answers yes...
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Don

  • Member
  • Posts: 331
Re: Will it work
« Reply #10 on: January 12, 2013, 10:00:50 pm »
I made a hickory board bow that's 1 1/8" but that as close as I can come to 1".
Logged

Offline kevinsmith5

  • Member
  • Posts: 287
Re: Will it work
« Reply #11 on: January 12, 2013, 10:55:48 pm »
Quote from: Ifrit617 on January 12, 2013, 09:30:38 pm
Quote from: kevinsmith5 on January 12, 2013, 09:17:12 pm
Depends

(attempting to win vaguest answer ever)

Winner! Do you want a medal or a cookie?  >:D


Jon

Yes
Logged

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Will it work
« Reply #12 on: January 12, 2013, 10:57:19 pm »
I had some "scrap pieces of ipe and white oak that were cut of 1" thick boards. I made a 1" wide white oak backed ipe and was amazed at how well it was turning out....easily in the 50# range at 60" t2t......until....I got cute and tried to get out some saw marks on the sides with the belt sander... Not much room for error when you start with an inch wide!!! ::)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline bow101

  • Member
  • Posts: 2,235
Re: Will it work
« Reply #13 on: January 12, 2013, 11:47:36 pm »
Quote from: okie64 on January 12, 2013, 08:37:31 pm
Ive made a few osage and one hickory an inch wide.

cheers.............................. :)

 
Quote from: sleek
"and I think you are the winner for the most vague question ever."
lol, hey no Noob or overly vague questions here, just asking. >:D
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell
Pages: [1]
« previous next »