« previous next »
Pages: [1]

Author Topic: Cherry Self Bow???  (Read 4416 times)

0 Members and 1 Guest are viewing this topic.

Offline Christian Soldier

  • Member
  • Posts: 245
Cherry Self Bow???
« on: January 10, 2013, 01:49:03 pm »
I've got a wild cherry stave that's been debarked and semi shaped for a little over a month now.

It's about 67in long and 2in wide most of the limb, kind of pyramid-y. Most of the cherry bows I've seen have been backed with something, I assume this is because cherry isn't too great in tension.
The back is clean as can be right now so no rings violated or anything.

I'd really prefer to keep it a self bow for apperance and for less work  ;) , can it be done?
Logged
2nd Timothy 2:3 "Endure hardship with us like a good soldier of Christ Jesus."

Offline Squirrelslayer

  • Member
  • Posts: 529
Re: Cherry Self Bow???
« Reply #1 on: January 10, 2013, 02:18:46 pm »
yep heres a video showing just how well cherry works for primitive/self bows, i still can't belive this bow is un backed!

https://www.youtube.com/watch?v=KD-Xp1wSa0c

Logged
WARNING: posts may contain nuts.

http://squirrelslayers.forumshome.com/ - check out my forum, and if you like what you see... Join!

also on YouTube

https://www.youtube.com/user/cj822100?feature=mhee

blackhawk

  • Guest
Re: Cherry Self Bow???
« Reply #2 on: January 10, 2013, 02:25:12 pm »
Uh...that's easy to believe cus its 78" long and only 43 pounds

If u wanna keep it unbacked then go for a bend in the handle bow and under 50 lbs,and no more than 28" draw Max.
Logged

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Cherry Self Bow???
« Reply #3 on: January 10, 2013, 02:26:09 pm »
Most of the backed bows you've seen are likely board bows. A clean stave should work hust fine with the right design. Giv'er!
Logged

Offline RyanY

  • Member
  • Posts: 1,999
Re: Cherry Self Bow???
« Reply #4 on: January 10, 2013, 02:27:43 pm »
Seen lots of cherry bows on here and it is true that many of them are backed. If you're worried about it's strength in tension then use a trapezoidal cross section with the belly more narrow than the back or maybe just crown the belly of the bow.
Logged

Offline Christian Soldier

  • Member
  • Posts: 245
Re: Cherry Self Bow???
« Reply #5 on: January 10, 2013, 04:12:02 pm »
Well I only have a 26.5" draw so keeping it under a 28" draw shouldn't be too much of a problem.

I was thinking of having it around 50lbs or just under but I'll trap the belly.

It'll defitely be a 'testing' bow to see how well cherry works.  :)
Logged
2nd Timothy 2:3 "Endure hardship with us like a good soldier of Christ Jesus."

Offline twilightandmist

  • Member
  • Posts: 198
    • My Etsy Shop:
Re: Cherry Self Bow???
« Reply #6 on: January 10, 2013, 04:43:47 pm »
it does not have to be lighter than 50 pounds. I have a 68 inch, unbacked cherry ELB that draws 72 pounds at 27 inches. it is 68 inches NTN, and has only 1 1/2 inches of set. you just have to baby it. also, this one was made from a stave.
Logged
My Longbow in one hand, My Colt 1860 Army in the other, and both feet in the past.

Offline dwardo

  • Member
  • Posts: 1,456
Re: Cherry Self Bow???
« Reply #7 on: January 11, 2013, 07:05:57 am »
I backed most of mine in silk. I did it purely for aesthetics and peace of mind.
Pretty sure it didn't need it though as it survived on the board fine.
Logged

Offline Christian Soldier

  • Member
  • Posts: 245
Re: Cherry Self Bow???
« Reply #8 on: January 11, 2013, 07:20:42 pm »
Quote from: twilightandmist on January 10, 2013, 04:43:47 pm
it does not have to be lighter than 50 pounds. I have a 68 inch, unbacked cherry ELB that draws 72 pounds at 27 inches. it is 68 inches NTN, and has only 1 1/2 inches of set. you just have to baby it. also, this one was made from a stave.

Any pics or design advice?
Logged
2nd Timothy 2:3 "Endure hardship with us like a good soldier of Christ Jesus."
Pages: [1]
« previous next »