Author Topic: Final Tiller check :P  (Read 2081 times)

0 Members and 1 Guest are viewing this topic.

Offline TacticalFate

  • Member
  • Posts: 234
Final Tiller check :P
« on: January 08, 2013, 02:31:38 pm »
Just want some comments before I take it out to 28". Currently 45lbs at 20". European Buckthorn, 68" NTN, high crown, some propeller.


« Last Edit: January 08, 2013, 02:44:43 pm by TacticalFate »

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Final Tiller check :P
« Reply #1 on: January 08, 2013, 02:46:33 pm »
I think it looks good. Be sure you draw 28 in. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

blackhawk

  • Guest
Re: Final Tiller check :P
« Reply #2 on: January 08, 2013, 02:49:36 pm »
The right limb mid limb where it crosses the first horizontal line from the tile looks a hair stiff....I do realize there is prop twist and more so in the left limb than the right limb. Left limb is looking good...your awful close.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Final Tiller check :P
« Reply #3 on: January 08, 2013, 03:23:31 pm »
I agree, mid limb on the right is about 12 scrapes stiff.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline TacticalFate

  • Member
  • Posts: 234
Re: Final Tiller check :P
« Reply #4 on: January 08, 2013, 04:42:10 pm »
Thanks guys!

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Final Tiller check :P
« Reply #5 on: January 08, 2013, 04:50:36 pm »
Considering the natural deflex in the left limb 2/3 the way out from the grip. I think that area could flex a tad more?
Del
Health warning, these posts may contain traces of nut.

Offline TacticalFate

  • Member
  • Posts: 234
Re: Final Tiller check :P
« Reply #6 on: January 08, 2013, 08:49:36 pm »
To 24" now. The area you guys said was stiff does have some reflex, so I didn't touch it too much. If this survives it's gonna be my first shooter :D
« Last Edit: January 08, 2013, 08:53:06 pm by TacticalFate »

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Final Tiller check :P
« Reply #7 on: January 08, 2013, 10:09:50 pm »
Can't give you any advice cause my tiller eye is less than perfect but I'm rooting for ya ! That buckthorn some wild wood isn't it?
I ain't broke but I'm badly bent.

Offline TacticalFate

  • Member
  • Posts: 234
Re: Final Tiller check :P
« Reply #8 on: January 08, 2013, 10:28:45 pm »
congrats on your bow, if that can survive this one is gonna be a piece of cake :P

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Final Tiller check :P
« Reply #9 on: January 09, 2013, 06:28:17 am »
Maybe a little stiff on the left fad,but looks pretty darn good to me.I would shoot it
 short draw a little,and then see how it looks. What draw length are you shooting for and do you have any weight left to give. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline TacticalFate

  • Member
  • Posts: 234
Re: Final Tiller check :P
« Reply #10 on: January 09, 2013, 11:12:13 am »
Drawing 45lbs at 24" now, going out to 28". Just that fade?

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Final Tiller check :P
« Reply #11 on: January 09, 2013, 11:26:12 am »
I would take a little off that fad and some evenly off both limbs,what weight are you looking for at 28 it should be about 55 now figuring about 2 1/2 lbs per inch. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Dictionary

  • Member
  • Posts: 717
Re: Final Tiller check :P
« Reply #12 on: January 09, 2013, 12:05:35 pm »
get the handle area bending a bit around 26 inches to get to 28 and you should be around your target weight with a nice functional d bow.
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson