« previous next »
Pages: [1]

Author Topic: feather sanding jig.  (Read 1554 times)

0 Members and 1 Guest are viewing this topic.

Offline Scottski

  • Member
  • Posts: 462
feather sanding jig.
« on: January 09, 2013, 10:45:15 pm »
not sure where to add this so here goes. sorry if its in the wrong spot. feather sanding jig i made from a pair of vice-grips 2 peices of flat steel 10 in. long and some jb weld. i have no welder. it works good so far.
Logged
Did the Native Americans think about all this that much or just do it?

Offline Adam

  • Member
  • Posts: 913
Re: feather sanding jig.
« Reply #1 on: January 09, 2013, 11:27:39 pm »
That looks like that should work perfect.
Logged
Pages: [1]
« previous next »