Today I finished an engine swap on my old UTV. I was nervous about this because I have very limited mechanical skills. Luckily it went pretty smooth. I had to swap out some parts to make the replacement engine work. I labeled every wire, hose, connection, nut, and bolt as I took the old engine out.

The old engine was burning a lot of oil and fouling up the plugs. Thew new engine has 2 more h.p.

I'm going to try to rebuild the old engine.

The new engine installed and ready to test. I wish I could have used the new muffler but it didn't fit. I had to use the old one.

It fired right up and ran smooth. I hope this will extend the life of it for a few more years.
