Author Topic: My first Osage Orange  (Read 1166 times)

0 Members and 1 Guest are viewing this topic.

Offline HighlandRanger

  • Member
  • Posts: 30
My first Osage Orange
« on: January 05, 2013, 07:04:57 pm »
I just acquired a big chunk of fresh cut Osage Orange. About 8' long by 13" wide. How should I prepare it? I know I will need to split and quarter it. How long should it sit before I do that? It has been treated on each end to keep it from drying out.

Once it is split and quartered how long should it sit until I make staves and bows out of it?

Thanks

P.S. Currently working on my first red oak board bows now.

Offline Newindian

  • Member
  • Posts: 734
Re: My first Osage Orange
« Reply #1 on: January 05, 2013, 07:11:07 pm »
are you sure that's Osage? I don't see any heart/sap wood
I like free stuff.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: My first Osage Orange
« Reply #2 on: January 05, 2013, 07:12:26 pm »
I would study the log real good and split it in half at the best location. There seems to be some twist, some snakey wood and a crotch at the small end. Once it is split in half put both halves under cover or in your shop. Seal the ends if they aren't already sealed and let it season until you have a few bows under your belt. There should be some interesting staves in that log but there will probably be some less interesting.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: My first Osage Orange
« Reply #3 on: January 05, 2013, 07:28:23 pm »
 >:( tell the osage to migrate up to the northwest please!  :P ::) oh well!
Amo innectis arcus- I love crafting bows (latin)

Offline HighlandRanger

  • Member
  • Posts: 30
Re: My first Osage Orange
« Reply #4 on: January 05, 2013, 07:53:59 pm »
Newindian - The ends have been painted with a sealer... that's why you can't see rings.

Pat B - Thanks for the info. :)