« previous next »
Pages: [1]

Author Topic: Need 4 inch round aluminum  (Read 1435 times)

0 Members and 1 Guest are viewing this topic.

Offline rileyconcrete

  • Member
  • Posts: 606
Need 4 inch round aluminum
« on: January 10, 2013, 01:55:52 pm »
I am in need of a solid 4 inch by 6 inch long piece of aluminum. If you have anything like this let me know as I can machine what I need out of it. Can be slightly smaller also. 

I have sinew to trade, plenty of obsidian also.

Thanks tell
Logged
Tell Riley

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Need 4 inch round aluminum
« Reply #1 on: January 10, 2013, 03:13:55 pm »
I have about 30 bars (?) of alum that are each about 14 inches long and about 3 inches wide and about 1/4 inch thick.  I will measure tonite and give more exact measurements.  They are all stamped "Alcoa" with other markings as well.  Will take and post pics if interested. 

Russ
Logged

Offline rileyconcrete

  • Member
  • Posts: 606
Re: Need 4 inch round aluminum
« Reply #2 on: January 10, 2013, 03:39:47 pm »
Guess I should have put solid round stock.  Thanks for the reply RB.
Tell
Logged
Tell Riley

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Need 4 inch round aluminum
« Reply #3 on: January 10, 2013, 05:32:22 pm »
ahh, round - no, I don't have that, sorry.  I see now your header says round too. 

Good Luck.

Russ 
Logged

Offline rileyconcrete

  • Member
  • Posts: 606
Re: Need 4 inch round aluminum
« Reply #4 on: January 10, 2013, 07:49:50 pm »
Thanks Russ.

Sonny I was hoping to trade to keep costs down.

Tell
Logged
Tell Riley

Offline aaron

  • Member
  • Posts: 1,037
Re: Need 4 inch round aluminum
« Reply #5 on: January 10, 2013, 11:03:24 pm »
tell, are you going to glass buttes this year?
aaron
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline seider

  • Member
  • Posts: 263
Re: Need 4 inch round aluminum
« Reply #6 on: January 11, 2013, 11:51:21 pm »
What do you have to trade I bet I can come
Up with something for you. I am a
Machinist and we do a lot of parts for lokehead Martin.
Logged
Now is the time for all good men to come to the aid of there country.
Pages: [1]
« previous next »