« previous next »
Pages: [1]

Author Topic: Elm Gullwing  (Read 1985 times)

0 Members and 1 Guest are viewing this topic.

Offline IrishJay

  • Member
  • Posts: 442
Elm Gullwing
« on: February 01, 2020, 04:12:12 pm »
This is bow was my Christmas gift to my dad (thats him drawing it).

Its an elm gullwing w/ working handle, 57" ntn, 42#@28", 4" brace height. Tips held about 1/2" net reflex.

Tips are whitetail antler from one of dads bucks, handle wrap is leather cordage tied with a whipping knot. The short backing around the handle area is rawhide which I used to create a good background to ink my 2 year olds finger prints onto. I used steel-wool/vinegar to age the wood and finished with satin poly.













Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline PatM

  • Member
  • Posts: 6,737
Re: Elm Gullwing
« Reply #1 on: February 01, 2020, 04:23:33 pm »
That tiller looks dangerous. A testament to the tenacity of Elm.
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Elm Gullwing
« Reply #2 on: February 01, 2020, 04:52:46 pm »
Any reason you shortened the bottom limb so much? The first foot of the upper lime is almost completely stiff. That handle isn't working.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Elm Gullwing
« Reply #3 on: February 01, 2020, 05:20:00 pm »
The top of the handle wrap is center stave. I know the bottom limb looks short but I've measured it many times. The handle does move, if you compare the brace pic to the draw. And yes the top limb is a bit stiff, but I think the slight cant that hes holding the bow out is exaggerating it in that pic.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline PatM

  • Member
  • Posts: 6,737
Re: Elm Gullwing
« Reply #4 on: February 01, 2020, 05:45:37 pm »
It shouldn't be center stave on a bow that long.  It's not the angle that's showing the tiller like that.  The bottom limb is bending like a Korean bow and the top like whip ended longbow.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Elm Gullwing
« Reply #5 on: February 01, 2020, 06:07:01 pm »
Where should the center of stave be compared to the handle?
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline DC

  • Member
  • Posts: 10,396
Re: Elm Gullwing
« Reply #6 on: February 01, 2020, 06:59:22 pm »
I put mine right in the middle of the handle. Others put the centre of the bow about one inch down from the top of the handle.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Elm Gullwing
« Reply #7 on: February 01, 2020, 07:08:55 pm »
Well, despite its short comings it draws smooth and shoots fast so dads happy with it.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Elm Gullwing
« Reply #8 on: February 01, 2020, 07:13:07 pm »
Smack dab in the middle for me also. My arrow pass is above center so I just tiller it to work that way. Either the arrow pass is center and the pivot point is low or the pivot point is center and the arrow pass is above center. Both ways will work. Go build another one. At some point you will look back at this one and realize how far you have come. You made a bow and most can’t say that. Tiller is off but it’s held together, so congrats on the bow.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline IrishJay

  • Member
  • Posts: 442
Re: Elm Gullwing
« Reply #9 on: February 01, 2020, 07:26:13 pm »
I generally try to split the difference, most of my bows put the web of the shooters hand about an inch below center stave and the arrow pass about an inch above.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Elm Gullwing
« Reply #10 on: February 01, 2020, 08:22:58 pm »
Ok,..this is just my take,..on a bendy handle,..I make the bow even,..you can shoot either limb up,..I put the handle in the middle,..I hold the bow so it is balanced in my hand...that usually puts the arrow above center...
     I can see u like this design,..next time reflex the handle,..no need to deflex,,,as the bow takes set it will gull wing,...
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Elm Gullwing
« Reply #11 on: February 01, 2020, 08:30:51 pm »
..next time reflex the handle,..no need to deflex

Brad I'm doing exactly that on the bow I'm currently building, except I added about a 30° flip to the tips, hoping to end up with a 5 curve after set.

Its the one I posted the pic of in DCs heat treating thread.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Elm Gullwing
« Reply #12 on: February 02, 2020, 12:42:15 am »
Ill check it out....I think I saw it
Logged

Offline jeffp51

  • Member
  • Posts: 1,641
Re: Elm Gullwing
« Reply #13 on: February 02, 2020, 08:56:50 am »
Quote from: IrishJay on February 01, 2020, 07:08:55 pm
Well, despite its short comings it draws smooth and shoots fast so dads happy with it.

That's what matters in the end. But what I worry about is the cut out arrow rest in a bendy handle. I am curious to see if that will hold up.
Logged
Pages: [1]
« previous next »