« previous next »
Pages: 1 2 3 [4]

Author Topic: what have you been avoiding?  (Read 7629 times)

0 Members and 2 Guests are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,745
Re: what have you been avoiding?
« Reply #45 on: December 27, 2012, 06:14:13 pm »
You leave the staples in there.... and man what a stave! Please get more than one bow of that! And if you get a few staves... lemme get one from you.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: what have you been avoiding?
« Reply #46 on: December 27, 2012, 07:01:37 pm »
Quote from: turtle on December 27, 2012, 05:29:23 pm
You guys are giving me the urge to start cutting away at this perfectly good fence post........if i could only figure out how to get the broken staples out.


Thats one snakey fence post there. It's kinda like looking at a straight stave after downing half a paycheck at the liquor store and/or getting socked in the noggin 2 or 3 times.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline bubby

  • Member
  • Posts: 11,054
Re: what have you been avoiding?
« Reply #47 on: December 27, 2012, 07:44:28 pm »
the only thing i've been avoiding is cleaning the shop, gotta make a path to get the wood and take it outside to work, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: what have you been avoiding?
« Reply #48 on: December 27, 2012, 10:41:18 pm »
Wow Turtle, I've seen an awful lot of bodark fence posts and have never seen one with that kind of character.  Amazing.

George
Logged
St Paul, TX

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: what have you been avoiding?
« Reply #49 on: December 28, 2012, 09:14:00 am »
Quote from: sleek on December 27, 2012, 06:14:13 pm
You leave the staples in there....

Hmm....can i borrow your drawknife? ???
Logged
Steve Bennett

Offline sleek

  • Member
  • Posts: 6,745
Re: what have you been avoiding?
« Reply #50 on: December 28, 2012, 03:32:22 pm »
Point taken....funny thing is, id let you. My drawknife is very stout, with a high angle edge. Also, those staples are rusted and weak I emagine? Even if not, it would go through them. I would just have to fix the blade later, which is easy. Sounds like you need to throw togeather a sacrificial drawknie out of old lawnmower blade or something....good luck!
« Last Edit: December 28, 2012, 03:38:12 pm by sleek »
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Tom Leemans

  • Member
  • Posts: 524
Re: what have you been avoiding?
« Reply #51 on: December 28, 2012, 05:23:43 pm »
Not really avoiding, but trying to decide what it will become. I have a primo tollhouse stave from Timo. I'll have to post a pic when I get my laptop back from the computer tech.
Logged

Offline steve b.

  • Member
  • Posts: 999
Re: what have you been avoiding?
« Reply #52 on: December 28, 2012, 11:35:11 pm »
I have a takedown osage bow that I did not align the limbs to the takedown sleeve very well.  I might try to salvage the sleeve for another bow which means I have to get the wood and epoxy out of it.
Logged

Offline dbb

  • Member
  • Posts: 745
Re: what have you been avoiding?
« Reply #53 on: December 29, 2012, 09:25:26 am »
Quote from: steve b. on December 28, 2012, 11:35:11 pm
I have a takedown osage bow that I did not align the limbs to the takedown sleeve very well.  I might try to salvage the sleeve for another bow which means I have to get the wood and epoxy out of it.
If the sleeves are metal  its easy,just heat them until the epoxy start to smell foul and push the wood out.

/Mikael
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: what have you been avoiding?
« Reply #54 on: December 29, 2012, 12:16:56 pm »
I've got one very similar to turtles fence post that I just pulled out the other day. It is on deck for one of my next three bows. Rings are super tight and has a wiggly jiggle all up and down both limbs so it should be a dandy.    Danny
Logged
"You know a tree by the fruit it bears"   God

Offline sleek

  • Member
  • Posts: 6,745
Re: what have you been avoiding?
« Reply #55 on: January 22, 2013, 05:33:25 am »
Well, I have a question. I am soon starting on my two staves, and this will be a drawn out process. However, I wonder, should I go for two bows, or splice the two staves to make one? They are both only 47.5 inches long. I only shoot a 25 inch draw, can shoot 24 comfortably, and dont like bows over 55 lbs. So, bendy handle, 45 lbs at 25 inches, 47 ntn? That's doable right? Or do I need to splice in some tips, or splice the two stave together?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: 1 2 3 [4]
« previous next »