« previous next »
Pages: [1]

Author Topic: sapwood question  (Read 1043 times)

0 Members and 1 Guest are viewing this topic.

Offline Shondy55

  • Member
  • Posts: 78
sapwood question
« on: December 22, 2012, 08:15:41 pm »
hey guys iv'e got a nice piece of osage but the growth rings are all very small and close together.  its a nice straight stave.  my question is how much sapwood should i leave on for a sapwood bow and whats the heaviest i could go with it? the stave is about 63in long.   thanks!
Logged
Go O' seeker and may your quest be not in vain

Offline DavidV

  • Member
  • Posts: 472
Re: sapwood question
« Reply #1 on: December 22, 2012, 08:22:14 pm »
Just take the bark off if you can't chase a ring.
Logged
Springfield, MO

Offline okie64

  • Member
  • Posts: 1,134
Re: sapwood question
« Reply #2 on: December 22, 2012, 09:00:37 pm »
Quote from: DavidV on December 22, 2012, 08:22:14 pm
Just take the bark off if you can't chase a ring.

Agreed, i just built my first with sapwood an it worked out fine. I dont have experience with heavy bows but I would say it would work fine up to 70 lbs or so, depending on earlywood/latewood ratio.
Logged
Pages: [1]
« previous next »