Author Topic: 1st bow follow-along  (Read 12007 times)

0 Members and 1 Guest are viewing this topic.

Offline RyanY

  • Member
  • Posts: 1,999
Re: 1st bow follow-along
« Reply #15 on: December 19, 2012, 01:32:37 am »
First, your lower limb is bending more than your upper limb and both are bending too much in the inner limb and not enough in the outer limb. If that's the type of bend you had the first time I can see why it broke. Narrow red oak board bows need to get the whole limb working well depending on how much you're asking of the wood. About the string slipping off, just file your string knocks deeper and it should help. You'd be surprised at how narrow you can make the wood that the string sits on.

Offline kevinsmith5

  • Member
  • Posts: 287
Re: 1st bow follow-along
« Reply #16 on: December 19, 2012, 10:16:55 pm »
Angle the nocks 45 degrees, that will fix the slipping.

Offline Calamitus

  • Member
  • Posts: 59
Re: 1st bow follow-along
« Reply #17 on: December 20, 2012, 01:48:11 pm »
Angle the nocks 45 degrees, that will fix the slipping.

They are 45 degrees measured from the back 1/2" from the tip. The reflex makes that greater than 45 in relation to the straight part of the belly.