« previous next »
Pages: [1] 2

Author Topic: 1st bow  (Read 4676 times)

0 Members and 1 Guest are viewing this topic.

Offline Calamitus

  • Member
  • Posts: 59
1st bow
« on: December 18, 2012, 09:40:44 am »
Well I've just about finished my first bow, it's ready to shoot, just needs to have some finish put on. Unfortunately it only pulls to 35# @ 28", I think I started it out too thin. How much weight would a bamboo backing add (and it it advisable to put it on red oak)? I have access to some flooring I can rip down. I will have some full draw pics up later today.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 1st bow
« Reply #1 on: December 18, 2012, 09:50:45 am »
Enjoy that bow for what it is and make another one.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

blackhawk

  • Guest
Re: 1st bow
« Reply #2 on: December 18, 2012, 09:53:38 am »
Quote from: Pat B on December 18, 2012, 09:50:45 am
Enjoy that bow for what it is and make another one.
Yup
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: 1st bow
« Reply #3 on: December 18, 2012, 09:56:22 am »
Congratulations! Just enjoy it. Start another. You'll never learn how to make weight by using bandaids. :) Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: 1st bow
« Reply #4 on: December 18, 2012, 10:04:01 am »
I hear that........LOL.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Calamitus

  • Member
  • Posts: 59
Re: 1st bow
« Reply #5 on: December 18, 2012, 10:27:29 am »
Quote from: George Tsoukalas on December 18, 2012, 09:56:22 am
Congratulations! Just enjoy it. Start another. You'll never learn how to make weight by using bandaids. :) Jawge

Ha! you're probably right. My kids want bows anyway...
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: 1st bow
« Reply #6 on: December 18, 2012, 10:39:43 am »
35# is pretty good for a first bow, it's15# heavier than most.
It's surprising how fast a well tillered 35# can shoot... you can always find a pretty lady to give it to :-*
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: 1st bow
« Reply #7 on: December 18, 2012, 12:11:25 pm »
Narrow your tips to 3/8" starting your narrowing about a foot down the limbs, reflex your bow on a simple form and toast the belly with a heat gun and you will be pleasantly surprised at the screamer you end up with.
Logged

Offline Calamitus

  • Member
  • Posts: 59
Re: 1st bow
« Reply #8 on: December 18, 2012, 07:47:40 pm »
@Eric - the tips are already at 3/8". I still want to back it with silk for safety.

Here's a full draw pic. 1.5" at the fades, parallel to half the limb, tapers to 3/8", 67"ntn, 35#@28"
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: 1st bow
« Reply #9 on: December 18, 2012, 11:44:15 pm »
That looks great! Don't mess with it at all. Shoot the heck out of it while you're making your next bow.
Logged

Offline steve b.

  • Member
  • Posts: 999
Re: 1st bow
« Reply #10 on: December 19, 2012, 12:03:31 am »
congrats, good job.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: 1st bow
« Reply #11 on: December 19, 2012, 06:50:05 am »
Looks great,I would probably just shoot and enjoy,BUT if I did want to pick up a little weight I would pike the bottom limb a couple of inches [looks a little weak anyway] and re tiller,that would pick up 4 or 5 lbs at least. Very nice job especially for your first.Congrats you got a shooter. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: 1st bow
« Reply #12 on: December 19, 2012, 09:14:02 am »
Nice job on that bow. If that is your first looks like we'll be seeing some really good bows from you in the future. Thats good tiller work on that bow and should be a good shooter from the looks of it. Pappy's advice makes sense if you want a little more draw weight but it looks like you have the skills to make your next build come in at the weight you want. You know there will be more don't you. ;)
Greg
Logged
I ain't broke but I'm badly bent.

Offline NTD

  • Member
  • Posts: 1,771
Re: 1st bow
« Reply #13 on: December 19, 2012, 12:22:42 pm »
Much better than my first attempt.  Nice work Calamitus.
Logged
Nate Danforth

Offline Calamitus

  • Member
  • Posts: 59
Re: 1st bow
« Reply #14 on: December 31, 2012, 08:25:03 pm »
All done.





Logged
Pages: [1] 2
« previous next »