« previous next »
Pages: [1] 2

Author Topic: bow design  (Read 3546 times)

0 Members and 2 Guests are viewing this topic.

Offline bushboy

  • Member
  • Posts: 2,256
bow design
« on: December 06, 2012, 10:14:12 pm »
Hay all, wondering what is your favorite bow design 4 both target and hunting application's!3 in a tea cup @ 30 yards.right now my favorite is a pyramid 2 -3/8. @ fades by 62 ttt bendy handle@ 55# @ 28. I'm talking about consitant groups . Regards bobbyjoe!thk's
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: bow design
« Reply #1 on: December 06, 2012, 11:03:09 pm »
Depends on the species. Yew I go 1 1/4"- 1 1/2" wide taper the last 12" to 1-2" tips.
Osage 1 1/2 wide. Taper last 12" to 3/8 tips
Logged
Clatskanie, Oregon

Offline oscar3b

  • Member
  • Posts: 79
Re: bow design
« Reply #2 on: December 06, 2012, 11:13:18 pm »
Lol!  When I get to that kinda accuracy I'll let ya know.  My favorite bow so far however after finishing bow #5 is an ELB tillered flat bow around 50# 68" ttt, around 2" wide at the fades, parallel to mid limb, and the tapering to 3/8" nicks.  Either that or a maple molle 1 1/2 wide by 64" long that draws 35# @ 28"
Logged
Ben

Berea, Kentucky
27" draw
30-70# (though I want to build to 125 one day)

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: bow design
« Reply #3 on: December 06, 2012, 11:17:09 pm »
Yea, kinda depends on the wood species. I have a sweet little osage bow that I can shoot at a target all afternoon, but for hunting I've been using a 64" hickory pyramid bow from a stave. Reliably deadly at 25 yards--providing I can hit the teacup ;)
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline bushboy

  • Member
  • Posts: 2,256
Re: bow design
« Reply #4 on: December 06, 2012, 11:31:24 pm »
Not wood.. Design?
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline twilightandmist

  • Member
  • Posts: 198
    • My Etsy Shop:
Re: bow design
« Reply #5 on: December 06, 2012, 11:34:19 pm »
meare heath with a weighted handle. i have several bows i did this way, especially lighter woods. i drill a half dozen holes into the static riser and insert brass pins and glue them in. puts more mass in the handle, so it gets rid of hand shock without slowing cast. that teacup is mine now :)
Logged
My Longbow in one hand, My Colt 1860 Army in the other, and both feet in the past.

Offline JonW

  • Member
  • Posts: 1,906
Re: bow design
« Reply #6 on: December 07, 2012, 12:05:16 am »
If I could shoot teacups at 30 yards I wouldn't care if the bow was pink and had ribbons on it. :o
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: bow design
« Reply #7 on: December 07, 2012, 12:58:50 am »
My Osage bows I make 1 1/4 at flares, taper to 1/2 at tips. My yew bow I made 1 5/8th at handle, tapered to 1/2 at tips. Make my bows with equal length limbs. I guess I shoot ok:)




Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: bow design
« Reply #8 on: December 07, 2012, 04:51:11 am »
Flat bow,long bow,recurve ,short bow?mass principle prevails!yeah I shoot more than I build!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline JW_Halverson

  • Member
  • Posts: 11,918
Re: bow design
« Reply #9 on: December 07, 2012, 02:04:22 pm »
Quote from: bushboy on December 06, 2012, 11:31:24 pm
Not wood.. Design?

You cannot discuss design without discussing wood.  They are too much dependant on each other.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: bow design
« Reply #10 on: December 07, 2012, 02:06:53 pm »
They go hand in hand
Logged
Clatskanie, Oregon

Offline Dictionary

  • Member
  • Posts: 717
Re: bow design
« Reply #11 on: December 07, 2012, 02:33:28 pm »
Quote from: JW_Halverson on December 07, 2012, 02:04:22 pm
Quote from: bushboy on December 06, 2012, 11:31:24 pm
Not wood.. Design?

You cannot discuss design without discussing wood.  They are too much dependant on each other.

J_W is the most honest person on this site  ;D


I like a bow with no built up handle or anything but that bends throughout its length and is around the length of the shooter or maybe a bit shorter.

66 or 67 inches from a white wood and about 1 3/8 at the handle pulling about 45 pounds is nice for me.

Logged
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson

Offline JW_Halverson

  • Member
  • Posts: 11,918
Re: bow design
« Reply #12 on: December 07, 2012, 03:17:08 pm »
Not that honest, honestly!

Just good at pointing out the painfully obvious at times.  Oh, and I have good taste in wine.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Dictionary

  • Member
  • Posts: 717
Re: bow design
« Reply #13 on: December 07, 2012, 03:18:15 pm »
Quote from: JW_Halverson on December 07, 2012, 03:17:08 pm
  Oh, and I have good taste in wine.

I forgot to mention that too.
Logged
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson

Offline sleek

  • Member
  • Posts: 6,745
Re: bow design
« Reply #14 on: December 07, 2012, 03:20:52 pm »

J_W is the most honest person on this site  ;D

Then this site is the biggest bunch of liers I have ever met!

No hope, there is just no hope...

Lol, just ribbing ya buddy.....

Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: [1] 2
« previous next »