« previous next »
Pages: 1 [2]

Author Topic: Osage recurve rework  (Read 5835 times)

0 Members and 1 Guest are viewing this topic.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Osage recurve rework
« Reply #15 on: January 15, 2012, 01:24:56 pm »
Now that is cool  8) love to hear the stats.
Logged
Is this bow making a sickness? or the cure...

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Osage recurve rework
« Reply #16 on: January 15, 2012, 04:48:03 pm »
i have wanted to do the same before but never had the courage. did you remove all of the sinew or just where you reworked the tips and splice back in? i layer my sinew in a way that i could not imagine how a splice could be effective? and how did you remove it? (heat and water or just sandpaper). sorry for all the ? but I would like to learn.
Logged

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Osage recurve rework
« Reply #17 on: January 15, 2012, 04:52:01 pm »
very nice looking bow, well tillered, looks perfect to me
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Osage recurve rework
« Reply #18 on: January 15, 2012, 05:00:26 pm »
Very nice. After a year it will probably have even more reflex. Nice rework. It was nice to begin with it looks like, but now is even better!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline JBL

  • Member
  • Posts: 108
Re: Osage recurve rework
« Reply #19 on: January 15, 2012, 08:34:06 pm »
Very nice work.  Looks perfect...BRAVO!!!!
Logged

mikekeswick

  • Guest
Re: Osage recurve rework
« Reply #20 on: January 17, 2012, 04:57:05 am »
Thanks guys. *I think it turned out pretty nice as well. ;)
paulsemp - yes I removed all the sinew at once. I used my heat gun on low setting and just took my time. A little water trickled on to where it was still stuck when working along helped too.
Cameroo - the limbs are 1 7/8 ths out of the fades to about mid limb then taper to 3/4 about 8 inches from the nock then into 3/8th at the nocks. I trapped the back so that there was 'less back' for the sinew to go on. Sinew/glue is heavier than wood but can be strained almost 8 times as much....so if you just cover the whole back you are on the road to making a slower bow. I also crowned the sinew so that it was strained a little more than if it was just left flat as before. I took maybe 1/8th off each side of the back. You could do a lot more but I wanted this to be a shooter and decided not to push it too far!
Logged

mikekeswick

  • Guest
Re: Osage recurve rework
« Reply #21 on: January 17, 2012, 04:58:27 am »
Forgot to say, I lost about 2 pounds overall.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Osage recurve rework
« Reply #22 on: January 17, 2012, 04:23:20 pm »
Did you ever chronograph it?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

mikekeswick

  • Guest
Re: Osage recurve rework
« Reply #23 on: November 28, 2012, 06:52:52 am »
186 fps with 495grain arrow.....it took me a while  :)
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Osage recurve rework
« Reply #24 on: November 28, 2012, 07:07:43 am »
O ya very nice rework. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Osage recurve rework
« Reply #25 on: November 28, 2012, 07:35:04 am »
Nice work, great bow.
Del
(Can you re use the sinew you took off, or do you need fresh stuff?)
Logged
Health warning, these posts may contain traces of nut.

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Osage recurve rework
« Reply #26 on: November 28, 2012, 09:05:19 am »
  Your bows are always impressive.  Nicely done!
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

mikekeswick

  • Guest
Re: Osage recurve rework
« Reply #27 on: November 28, 2012, 09:42:10 am »
Cheers fellas. It's still my favourite!
Del - yes you could re-use the sinew if it didn't have a finish on it but you would need the patience of Job...... ;)
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage recurve rework
« Reply #28 on: November 28, 2012, 10:20:16 am »
Very nice rework! I usually end up making any re-dos worse! Awesome bow.
Logged
Pages: 1 [2]
« previous next »