Author Topic: 31" Draw ELB for Xmas  (Read 4777 times)

0 Members and 1 Guest are viewing this topic.

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
31" Draw ELB for Xmas
« on: November 20, 2012, 11:03:13 am »
A guy contacted me hoping for an ELB for Christmas as a present from his wife.
How could I refuse... but I'm not delivering it down the chimney.
It's made from billets split from a nice half log I had which had been teasing me for a few years.

The top of the splice and a bit of red blush from the remainder of a knot makes the grip area rather pretty.

Nice knot remnant by the bottom nock too.

Here's the FD shot, It's tricky shooting it at that long draw and I've twanged my raspberry ripple (rhyming slang) a few times.


Full build along on my blog, starting here. (With another bow being built at the same time)
http://bowyersdiary.blogspot.co.uk/2012/10/splicing-yew-billets.html
Hope you like it.
Santa
Del
Health warning, these posts may contain traces of nut.

Offline kleinpm

  • Member
  • Posts: 218
Re: 31" Draw ELB for Xmas
« Reply #1 on: November 20, 2012, 11:07:40 am »
That sure is a sweet bow.

Every time I see one of your bows it makes me want to try a yew bow.

Patrick

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: 31" Draw ELB for Xmas
« Reply #2 on: November 20, 2012, 11:07:53 am »
Beautiful bow with great tiller, Del. I especialy like the mother of pearl arrow pass. Well one, Santa! 
 A breast protector might help!  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 31" Draw ELB for Xmas
« Reply #3 on: November 20, 2012, 11:09:17 am »
Nice job, Dell!! Be sure to get your milk and cookies!! ;)
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
SMASHED IN MY HAND!
« Reply #4 on: November 20, 2012, 11:48:35 am »
Damn, I was shooting it in and suddenly the splice gave way in my hand... :'(
I may be able to repair it, the limbs are fine, but it will loose a little length.
Del
Health warning, these posts may contain traces of nut.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,904
  • if you have to ask you wouldn't understand ,Tenn.
Re: 31" Draw ELB for Xmas
« Reply #5 on: November 20, 2012, 11:57:56 am »
Beautiful bow,to bad about the come a part :(  but if anyone can repair it you can,good luck with that. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: 31" Draw ELB for Xmas
« Reply #6 on: November 20, 2012, 11:59:34 am »
Sorry to hear that Del.   A good cordage wrap will prevent that from happening again and it makes a good handle wrap.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: 31" Draw ELB for Xmas
« Reply #7 on: November 20, 2012, 12:22:01 pm »
Del, that is a beauty.  I sure hope you can get her back together again.  Any idea why the splice failed?
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline Keenan

  • Member
  • Posts: 4,824
Re: 31" Draw ELB for Xmas
« Reply #8 on: November 20, 2012, 12:37:03 pm »
Great bow Del and the tiller is fantastic. Well done!

Offline k-hat

  • Member
  • Posts: 1,058
Re: 31" Draw ELB for Xmas
« Reply #9 on: November 20, 2012, 12:53:14 pm »
She's a real beauty and i always love your work Del.  I was just wondering when you were gonna take the "amateur" tag off of your website.  You, sir, are certainly no amateur!!

Hope she get's it together (the splice that is!), i bet she shoots sweet.

Offline adb

  • Member
  • Posts: 5,339
Re: 31" Draw ELB for Xmas
« Reply #10 on: November 20, 2012, 01:38:58 pm »
Nice work, Del! Just like I like 'em... clean, simple, round tiller. Too bad about the splice letting go. What kind of glue were you using? Ive spliced a few bellies, but always with a backing strip or a tri-lam. I use nothing but TB3, even for splices, with no failures so far.

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
Re: 31" Draw ELB for Xmas
« Reply #11 on: November 20, 2012, 01:57:18 pm »
Thanks for the good wishes and votes of confidence with the splice.
I've had a look at it and i think I can salvage it, I'll loose about 2-3".
Rather thn building up the back with leather under the grip I'll add a sliver of sapwood.
My guess is the splice was a bit too tight at the tip of the V and when i glued it I gave it a firm knock on the floor to seat it, maybe that just squeezed out the glue from the tip. The belly stayed glued, I think the break opened up from the tip of the V on the back, but it's hard to tell.

Nature has a way of cheering you up... I went back into my garage and there was a peackok butterfly fluttering about in there :) They get in there to over winter.
I switched off the lights and came out to let it settle down
I hope that's a good omen... not that I'm soft enough to believe in such things O:).
Here's a pic of Del's patent bow hinge >:D...
BTW I used Resintite, used it before on Osage no prob...
« Last Edit: November 20, 2012, 02:59:52 pm by Del the cat »
Health warning, these posts may contain traces of nut.

Offline RyanY

  • Member
  • Posts: 1,997
Re: 31" Draw ELB for Xmas
« Reply #12 on: November 20, 2012, 02:01:00 pm »
Dang. Such a gorgeous bow too. Well if you figure out how to fix it let me know. I have a bow that broke right at the handle thats waiting for some attention.

Offline Josh B

  • Member
  • Posts: 3,741
Re: 31" Draw ELB for Xmas
« Reply #13 on: November 20, 2012, 02:15:56 pm »
Bummer about the break.   She was such a classy lass.  I was going to ask for dimensions , but it would seem that those are yet to be determined at this point.   Josh

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: 31" Draw ELB for Xmas
« Reply #14 on: November 20, 2012, 02:31:29 pm »
That sucks so bad. Such a beautiful bow, and just gorgeous strike plate inlay.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair