« previous next »
Pages: 1 [2]

Author Topic: Finish  (Read 4217 times)

0 Members and 2 Guests are viewing this topic.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Finish
« Reply #15 on: November 15, 2012, 10:24:37 pm »
Osage gets 3 coats of Tru Oil. I like it to fill in the grain. Then I give the bow 3 coats of Spar Urethane for really good waterproofing. For other woods I skip the Tru Oil. I stan and then use Spar Urethane. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline bow101

  • Member
  • Posts: 2,235
Re: Finish
« Reply #16 on: November 15, 2012, 11:38:40 pm »
Is Spar Urethane man made..? Just asking because I guess for that matter I'm using Mineral Oil. I have used it extensively in many other projects, only thing is the oil drys out so you have to seal it with a clear coat.

Quote from: George Tsoukalas on November 15, 2012, 10:24:37 pm
Osage gets 3 coats of Tru Oil. I like it to fill in the grain. Then I give the bow 3 coats of Spar Urethane for really good waterproofing. For other woods I skip the Tru Oil. I stan and then use Spar Urethane. Jawge
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline seabass

  • Member
  • Posts: 2,267
Re: Finish
« Reply #17 on: November 15, 2012, 11:45:17 pm »
scrub your fish skins with a soft brush and dawn dish liquid.i use tung oil.it is thin like tru oil and dries overnight.it takes quite a few coats with a thin finish though.
Logged
Middletown,Ohio

Offline Boofus

  • Member
  • Posts: 55
Re: Finish
« Reply #18 on: November 16, 2012, 01:36:14 am »
The same makers of Tru Oil make a wax that is super easy to apply and is water repellant as all get out!
 
Logged
Pages: 1 [2]
« previous next »