Author Topic: My new project finished  (Read 8258 times)

0 Members and 1 Guest are viewing this topic.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #15 on: November 14, 2012, 06:46:29 pm »
Thanx george i think it will be. my neighbor sed this brand was more reliable then the ford tractors and since its sleeved, the block can always be rebuilt :). He has worked on lots of tractors in his mechanic carear i have faith it will work out. So far so good :). And if not its deffinitly worth atleast 200$ in junk price
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: My new project
« Reply #16 on: November 15, 2012, 01:04:32 am »
Sterling, I think you should go with this upgrade to your tractor.

http://www.youtube.com/watch?v=JqBy92fTXsg
I started out with nothin' and I still got most of it left

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #17 on: November 15, 2012, 11:57:52 am »
Haha nice clint  looks like a turbo and cold air intake. That tractor was diesel lots of low end :) 
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: My new project
« Reply #18 on: November 15, 2012, 02:39:02 pm »
28 thats not bad it was 3 below here the otherday and it always hits 45 below at least once every year 2 years ago it hit 69 below one day not including a 15mph wind
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #19 on: November 15, 2012, 09:29:26 pm »
Good news i took the carb apart and it was spotless  ;D looks  like the  last owner drained it before he parked it woot
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #20 on: November 26, 2012, 01:02:34 pm »
Looks like the starter need to rebuilt hopefuly this week i can take it in :) onece its back on il re run the comression test and then star it up if itsgood :)
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #21 on: December 03, 2012, 10:23:37 am »
Thanx for the info scott i dont plan on scrapping this d12 hehe with theblock having sleeves il rebuild it if it comes to that ;) so far so good i just pickd the starte up from the rebuild plac its servo went out. Now i can run a good compression test :D im so close to starting it up so excited hehe
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #22 on: December 04, 2012, 01:12:14 pm »
ITS ALIVE :) this morning i ran the compression test which was good and cranked  her up. Turns out the battery i have is bad so my dad pulld me with his truck i dumped the clutch and vroom it started right up haha im so excited it ran. about 15 min of running it started to over heat like the last owner sed. After it cooled down abit i Pulled the thermostat housing off to check it and what do you know it wasnt in there and since the outside temp wasnt blistering hot it looks like il need a new radiator not to bad of a fix hopefully il order one in a few weeks and crank her up again with a new thermostat. Fingers crossed she wont over heat
Here is a video of me recording the temp guage to almost it overheating she sounds good
http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/1B2ED12A-308D-4322-A171-A32C1303A018-1053-0000019BB2BA72FA.mp4
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: My new project
« Reply #23 on: December 04, 2012, 07:19:22 pm »
Way to go, sounds great. I thought I was lucky? ;D
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #24 on: December 04, 2012, 07:46:54 pm »
Thanx eddie im plannIng to pull the radiater and take it into a radiater shop here in town they sed they could rod it and or just recore it
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline richardzane

  • Member
  • Posts: 500
  • active Wyandot tribal member
    • richardzanesmith.wordpress.com
Re: My new project
« Reply #25 on: December 04, 2012, 07:47:28 pm »
wow from that photo the tires on it look great! mine are all shredded from flint out here.
when i'm working on things my ancestors worked, singing the songs my ancestors sang, dancing the same dances, speaking the same language, only then  I feel connected to the land, THIS land, where my ancestors walked for thousands of years...

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project
« Reply #26 on: December 04, 2012, 08:33:51 pm »
They have some dryrot but there still holding air :)
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: My new project
« Reply #27 on: December 06, 2012, 01:16:49 am »
Nice Sterling! Congrats.
St Paul, TX

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: My new project finished
« Reply #28 on: January 06, 2013, 10:37:07 pm »
Well the new radiator came in yesterday  ;D and she runs great nice and cool around 180dgf

Here is a pic of me testing the shredder it's works very well
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: My new project finished
« Reply #29 on: January 06, 2013, 10:38:49 pm »
All right Sterling!  Way to stick with it.  You can't hardly kill an old tractor.
I started out with nothin' and I still got most of it left