Author Topic: Most extreme bend in ash I have accomplished (Gunsmoke edition!)  (Read 3122 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,745
Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« on: November 10, 2012, 03:19:55 am »
Here is a 45@28 66ntn bow of ash I made and it is the first time I have made a bow of ash this length, bend so far of this weight, and survive. I had a bad problem tillering this bow because of the large knot that was on the belly out of the lower fade. It cause allot of deflex that made it difficult to get an even strain on each limb. I had to do it by measuring the deflex in the limb and making sure that at brace the lower limb had and equal distance bend as the upper limb, plus the amount of deflex. Anyways, heres the pics... How do yall think I did?



Here is the knot/kink





« Last Edit: November 10, 2012, 11:07:35 pm by sleek »
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sleek

  • Member
  • Posts: 6,745
Re: Most extreme bend in ash I have accomplished
« Reply #1 on: November 10, 2012, 03:24:22 am »
That kink on the lower limb caused an early high string angle that caused the upper limb to come around faster than the lower. I am not sure how this affects the performance. I think it does cause the lower limbs outer tip to stress more than the upper, so the lower limb is a bit thicker.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Most extreme bend in ash I have accomplished
« Reply #2 on: November 10, 2012, 06:57:18 am »
Looks good to me. :)
Steve Bennett

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Most extreme bend in ash I have accomplished
« Reply #3 on: November 10, 2012, 07:09:26 am »
Looks good to me too.
Del
Health warning, these posts may contain traces of nut.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Most extreme bend in ash I have accomplished
« Reply #4 on: November 10, 2012, 10:53:03 am »
Looks good to me too.
Del

I second that.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline PatM

  • Member
  • Posts: 6,737
Re: Most extreme bend in ash I have accomplished
« Reply #5 on: November 10, 2012, 11:25:38 am »
A gun leaning against the wall behind an archer drawing a bow that might break seems like a bad idea. I'm sure it's not loaded though....

Offline sleek

  • Member
  • Posts: 6,745
Re: Most extreme bend in ash I have accomplished
« Reply #6 on: November 10, 2012, 12:05:22 pm »
Good thought Pat, but thats an unloaded air rifle.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sharpend60

  • Member
  • Posts: 355
Re: Most extreme bend in ash I have accomplished
« Reply #7 on: November 10, 2012, 12:33:27 pm »
Nice bend.

Ive been thinking bout picking up one of those whispers....

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Most extreme bend in ash I have accomplished
« Reply #8 on: November 10, 2012, 12:55:44 pm »
Looks good Sleek! Nice work.

Tattoo Dave
Rockford, MI

Offline sleek

  • Member
  • Posts: 6,745
Re: Most extreme bend in ash I have accomplished
« Reply #9 on: November 10, 2012, 07:17:16 pm »
Thanks for the compliments guys, I was actually unsure of the tiller but reckon its ok. Buck Taylor from Gunsmoke agreed. I met him today at the gunshow and he fancied it enough to draw it a few times then autograph it.



Not bad for a cell phone pic.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sleek

  • Member
  • Posts: 6,745
Re: Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« Reply #10 on: November 11, 2012, 05:16:38 am »
Sharpened, I love my pellet guns. I have a subsonic one for birds inside city limits ( they are illegal to shoot in the city and its quiet ) and I have a super sonic one for squirrels when I'm out hunting. Ammo is cheap and effective.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline PatM

  • Member
  • Posts: 6,737
Re: Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« Reply #11 on: November 11, 2012, 02:04:00 pm »
Careful with the illegal admissions online....

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« Reply #12 on: November 12, 2012, 10:14:48 am »
How cool is that? Ole Muley looks like he's done that before!! :)
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« Reply #13 on: November 12, 2012, 11:30:41 am »
Freakin cool.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline sleek

  • Member
  • Posts: 6,745
Re: Most extreme bend in ash I have accomplished (Gunsmoke edition!)
« Reply #14 on: November 12, 2012, 12:15:53 pm »
His form aint to bad is it? Thing is, before he drew it back, he admitted to not being an archer at all. Bet he would be a good one if he gave it a try...
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others