Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Why...
« previous
next »
Print
Pages: [
1
]
Author
Topic: Why... (Read 1961 times)
0 Members and 1 Guest are viewing this topic.
toomanyknots
Member
Posts: 3,132
Why...
«
on:
November 09, 2012, 09:08:16 pm »
http://www.ebay.com/itm/VINTAGE-BEN-PEARSON-PONY-Recurve-Longbow-Hunting-Archery-Bow-700-60-/321017661965?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D3349491348280159760%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D321017661965%26
Logged
"The way of heaven is like the bending of a bow-
the upper part is pressed down,
the lower part is raised up,
the part that has too much is reduced,
the part that has too little is increased."
- Tao Te Ching, 77, A new translation by Victor H. Mair
thomas h
Member
Posts: 394
Re: Why...
«
Reply #1 on:
November 09, 2012, 09:16:09 pm »
why what ?
Logged
turtle
Member
Posts: 1,069
PA1007207
Re: Why...
«
Reply #2 on:
November 09, 2012, 09:19:32 pm »
Hope nobody tries to draw it while its still strung backwards.
Logged
Steve Bennett
Tortoise
Member
Posts: 162
Re: Why...
«
Reply #3 on:
November 09, 2012, 09:50:01 pm »
That poor bow...
Logged
-Peter
Arizona
half eye
Member
Posts: 3,300
Re: Why...
«
Reply #4 on:
November 09, 2012, 10:04:24 pm »
Back in the 50's and 60's it was common for folks to store their recurves with the string backwards like that. I've seen it a lot in the past but dont recall anybody saying the reason. Just my past experience though
rich
Logged
seabass
Member
Posts: 2,267
Re: Why...
«
Reply #5 on:
November 09, 2012, 10:27:53 pm »
on a recurve it doesn't hurt it.the string is long enough.if you try to pull it,the string will pop off.it looks bad,but the bow is not being hurt.
Logged
Middletown,Ohio
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Why...